Home > Accessories > UPS & Power > APC UPS & Power > APC Metered Rack PDU

APC Metered Rack PDU

Mfg Part #: AP8841

APC Metered Rack PDU

Ordering Information
Our Price$474.71
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

Metered rack PDUs provide real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads before critical IT failures occur.

APC by Schneider Electric Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.

User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by Schneider Electric's StruxureWare solution.

Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.

Alarm Thresholds - Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities.).

Load Indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

Product Highlights
  • Local current monitoring display
  • Load indicator LED
  • Rack-mountable
  • Single input power source
  • Wide range of input and output connections

Please note that this is the European model; please check the power requirements for this product. Please contact us at 1-866-469-2678 if you have any questions.

General Specifications

Manufacturer Part #AP8841
Manufacturer UPC #0731304277002
Cost Central Item #11195655
Product DescriptionAPC Metered Rack PDU - Power distribution strip ( rack-mountable ) - AC 200/208/230 V - Ethernet 10/100, RS-232 - 42 output connector(s) - 0U - for P/N: SUA5000RMI5U, SUA750IX38
Device TypePower distribution strip - rack-mountable
Rack Size0U
Approximate Weight15.1 lbs
Input VoltageAC 200/208/230 V
Output VoltageAC 200/208 V
Output connector(s)36 x power IEC 320 EN 60320 C13
6 x power IEC 320 EN 60320 C19
NetworkingEthernet 10/100, RS-232
Remote Management ProtocolSNMP, Telnet, HTTP
Approximate Dimensions (WxDxH)2.2 in x 1.7 in x 70.5 in
Manufacturer Warranty2 years warranty
Designed ForP/N: SUA5000RMI5U, SUA750IX38

Compatible With

Extended Specifications

Device TypePower distribution strip - rack-mountable
Height (Rack Units)0U
Power Device
Input VoltageAC 200/208/230 V
Input Voltage RangeAC 200 - 240 V
Frequency Required50/60 Hz
Input Connector(s)1 x power NEMA L6-30
Power Output Connectors Details36 x power IEC 320 EN 60320 C13
6 x power IEC 320 EN 60320 C19
Output VoltageAC 200/208 V
Max Electric Current24 A
Circuit ProtectionCircuit breaker
Remote Management InterfaceEthernet 10/100, RS-232
Remote Management ProtocolSNMP, Telnet, HTTP
Expansion / Connectivity
Interfaces1 x management (Ethernet) - RJ-45
1 x management (RS-232)
Cables Included1 x serial cable - external
1 x power cable - 10 ft
Rack Mounting KitIncluded
FeaturesLCD display, overload protection
Compliant StandardsVDE, IEC 60950, CSA 22.2 No. 60950, RoHS, UL 60950-1, REACH
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Min Operating Temperature23 °F
Max Operating Temperature113 °F
Humidity Range Operating5 - 95%
Dimensions & Weight
Approximate Width2.2 in
Approximate Depth1.7 in
Approximate Height70.5 in
Approximate Weight15.1 lbs
Dimensions & Weight (Shipping)
Shipping Width6.4 in
Shipping Depth4.2 in
Shipping Height78.7 in
Shipping Weight18.7 lbs
Compatibility Information
Designed ForP/N: SUA5000RMI5U, SUA750IX38

Available Compatible Products

DescriptionMfg Part #StockPrice 
APC Smart-UPS 750 - UPSAPC Smart-UPS 750 - UPS
UPS - AC 230 V - 500 Watt - 750 VA - USB - 6 output connector(s)
SUA750IX38 No $312.13 Buy Now
UPS - AC 230 V - 4 kW - 5000 VA - Ethernet 10/100, RS-232 - 10 output connector(s) - 5U
SUA5000RMI5U No $2,825.27 Buy Now

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0994 seconds