Home > Accessories > UPS & Power > APC UPS & Power > APC Switched Rack PDU 2G Zero U

APC Switched Rack PDU 2G Zero U

Mfg Part #: AP8661


APC Switched Rack PDU 2G Zero U

Ordering Information
MSRP$2,030.00
Our Price$1,250.27
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces.

Network Management
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote individual outlet control
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Power delays
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load indicator LED
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Integrates with InfraStruXure Central
An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network.

Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.


Product Highlights
  • Metering-by-Outlet capability
  • Network Management Capabilities
  • Local Current Monitoring Display
  • Flash Upgradeable
  • Integrates with StruxureWare Data Center Expert


General Specifications

ManufacturerAPC
Manufacturer Part #AP8661
Manufacturer UPC #0731304276999
Cost Central Item #11388188
Product DescriptionAPC Switched Rack PDU 2G Zero U - Power distribution unit ( rack-mountable ) - AC 208 V - Ethernet 10/100, RS-232 - 24 output connector(s) - 0U - Canada, United States
Device TypePower distribution unit - rack-mountable
Rack Size0U
Approximate Weight15.7 lbs
LocalizationCanada, United States
Input VoltageAC 208 V
Output VoltageAC 208 V
Output connector(s)3 x power IEC 320 EN 60320 C19
21 x power IEC 320 EN 60320 C13
NetworkingEthernet 10/100, RS-232
Remote Management ProtocolSNMP, Telnet, HTTP
Approximate Dimensions (WxDxH)2.2 in x 2 in x 72 in
Manufacturer Warranty2 years warranty

Extended Specifications

General
Device TypePower distribution unit - rack-mountable
Height (Rack Units)0U
ColorBlack
LocalizationCanada, United States
Power Device
Input VoltageAC 208 V
Frequency Required50/60 Hz
Input Connector(s)1 x power NEMA L21-20
Power Output Connectors Details3 x power IEC 320 EN 60320 C19
21 x power IEC 320 EN 60320 C13
Output VoltageAC 208 V
Max Electric Current16 A
Networking
Remote Management InterfaceEthernet 10/100, RS-232
Remote Management ProtocolSNMP, Telnet, HTTP
Expansion / Connectivity
Interfaces1 x management (Ethernet) - RJ-45
1 x management (RS-232)
Miscellaneous
Cables Included1 x power cable - external - 6 ft
1 x serial cable - external
Rack Mounting KitIncluded
FeaturesAudible alarm, LCD display
Compliant StandardsUL, cUL, ICES-003, VCCI Class A ITE, RoHS, FCC Part 15 A, REACH
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Min Operating Temperature23 °F
Max Operating Temperature113 °F
Humidity Range Operating5 - 95%
Dimensions & Weight
Approximate Width2.2 in
Approximate Depth2 in
Approximate Height72 in
Approximate Weight15.7 lbs
Dimensions & Weight (Shipping)
Shipping Width6.4 in
Shipping Depth4.6 in
Shipping Height80.3 in
Shipping Weight20.7 lbs

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0909 seconds