Home > Accessories > UPS & Power > APC UPS & Power > APC Switched Rack PDU 2G Zero U

APC Switched Rack PDU 2G Zero U

Mfg Part #: AP8941


APC Switched Rack PDU 2G Zero U

Ordering Information
MSRP$1,275.00
Our Price$783.57
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.

APC by Schneider Electric Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.

User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by Schneider Electric's StruxureWare solution.

Network Management - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities.).

Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only).

Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load Indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

Network Management
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.

Remote individual outlet control
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).

Power delays
Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.

Load indicator LED
Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Integrates with InfraStruXure Central
An IT-ready, scalable monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network.

Single input power source
Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.

Please note that this is the European model; please check the power requirements for this product. Please contact us at 1-866-469-2678 if you have any questions.



General Specifications

ManufacturerAPC
Manufacturer Part #AP8941
Manufacturer UPC #0731304277088
Cost Central Item #11239287
Product DescriptionAPC Switched Rack PDU 2G Zero U - Power distribution unit ( rack-mountable ) - AC 200/208/230 V - Ethernet, RS-232, USB - 24 output connector(s)
Device TypePower distribution unit - rack-mountable
Approximate Weight16.8 lbs
LocalizationJapan, Canada, United States
Input VoltageAC 200/208/230 V
Output VoltageAC 200/208 V
Output connector(s)3 x power IEC 320 EN 60320 C19
21 x power IEC 320 EN 60320 C13
NetworkingEthernet, RS-232, USB
Remote Management ProtocolSNMP, Telnet, HTTP
Approximate Dimensions (WxDxH)2.2 in x 1.8 in x 72 in
Manufacturer Warranty2 years warranty

Extended Specifications

General
Device TypePower distribution unit - rack-mountable
ColorBlack
LocalizationJapan, Canada, United States
Power Device
Input VoltageAC 200/208/230 V
Frequency Required50/60 Hz
Input Connector(s)1 x power NEMA L6-30
Power Output Connectors Details3 x power IEC 320 EN 60320 C19
21 x power IEC 320 EN 60320 C13
Output VoltageAC 200/208 V
Max Electric Current30 A
Networking
Remote Management InterfaceEthernet, RS-232, USB
Remote Management ProtocolSNMP, Telnet, HTTP
Expansion / Connectivity
Interfaces1 x management (Ethernet) - RJ-45
1 x management (RS-232)
1 x management (USB)
Miscellaneous
Cables Included1 x power cable - external - 10 ft
1 x serial cable - external
Rack Mounting KitIncluded
FeaturesLCD display, current meter, LED indicators, overload protection
Compliant StandardsUL, cUL, ICES-003, VCCI Class A ITE, RoHS, FCC Part 15 A, PSE Mark, REACH
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Min Operating Temperature23 °F
Max Operating Temperature113 °F
Humidity Range Operating5 - 95%
Dimensions & Weight
Approximate Width2.2 in
Approximate Depth1.8 in
Approximate Height72 in
Approximate Weight16.8 lbs
Dimensions & Weight (Shipping)
Shipping Width6.5 in
Shipping Depth4.9 in
Shipping Height80.3 in
Shipping Weight22 lbs

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0361 seconds