Home > Networking > Switches > Allied Telesis Switches > Allied Telesis AT IFS802SP

Allied Telesis AT IFS802SP

Mfg Part #: AT-IFS802SP-80


Allied Telesis AT IFS802SP

Ordering Information
MSRP$962.00
Our Price$577.42
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The AT-IFS802SP is a high performance and meets the high reliability requirements of industrial network operations. This industrial switch provides a network manager some key features using the simple web-based management function such as; port-based VLANs, IEEE 802.1p QoS, port trunking/link aggregation, port mirroring, priority queues and IEEE 802.1x security support. With support of up to 8k MAC addresses and a 1 Mbit packet buffer the AT-IFS802SP switch is an ideal option for integrating management into your network solution.

Securing the network edge
To ensure the protection of your data, it is important to control access to your network. Protocols such as IEEE 802.1x port-based authentication guarantee that only known users are connected to the network. Unknown users who physically connect can be isolated to a pre-determined part of your network offering quests such benefits as Internet access while ensuring the integrity of your private network data.

Gigabit and Fast Ethernet SFP support
The SFP ports support both Gigabit and Fast Ethernet Small Form-factor Pluggables (SFPs). This makes the switch an ideal family for environments where Gigabit fiber switches will be phased in over time. This allows for connectivity to the legacy 100FX hardware until it is upgraded to Gigabit. Support for both speeds of SFP allows organizations to stay within budget as they migrate to faster technologies.

High network resiliency
The AT-IFS802SP industrial switch supports the X-ring protocol that can help the network recover from connection failure within 20 ms, thus making the network system very resilient. The X-ring algorithm is similar to spanning tree protocol (STP) algorithm but its recovery time is faster than STP. In addition, dual homing and couple ring topology are also supported to further increase the network availability.


Product Highlights
  • 5.6 Gbps switching capacity
  • Supports 100/1000 Mbps SFPs
  • 12-48 VDC redundant power inputs
  • IP 30 metal case
  • Support X-ring function
  • SNMP v1/v2c/v3, web, Telnet, CLI management
  • TFTP firmware update, system configure restore and backup
  • Ingress packet filter and egress rate limit


General Specifications

ManufacturerAllied Telesis
Manufacturer Part #AT-IFS802SP-80
Manufacturer UPC #0767035199436
Cost Central Item #11564302
Product DescriptionAllied Telesis AT IFS802SP - Switch - managed - 8 x 10/100 + 2 x combo Gigabit SFP - DIN rail mountable, wall-mountable - DC power
Device TypeSwitch - 8 ports - managed
Enclosure TypeDIN rail mountable, wall-mountable
InterfacesFast Ethernet
Ports8 x 10/100 + 2 x combo Gigabit SFP
PerformanceSwitching capacity : 5.6 Gbps
Throughput : 8.3 Mbps
MAC Address Table Size8K entries
Remote Management ProtocolSNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, CLI
FeaturesFlow control, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, E-mail alert, firmware upgradable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, LLDP support, Link Aggregation Control Protocol (LACP), port based access control, Dynamic VLAN Support (GVRP)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1ab (LLDP)
PowerDC 12 - 48 V
Approximate Dimensions (WxDxH)17.5 in x 12.7 in x 1.7 in
Approximate Weight3 lbs

Extended Specifications

General
Device TypeSwitch - 8 ports - managed
Enclosure TypeDIN rail mountable, wall-mountable
InterfacesFast Ethernet
Ports8 x 10/100 + 2 x combo Gigabit SFP
PerformanceSwitching capacity : 5.6 Gbps
Throughput : 8.3 Mbps
MAC Address Table Size8K entries
Remote Management ProtocolSNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTP, CLI
FeaturesFlow control, trunking, VLAN support, IGMP snooping, Syslog support, port mirroring, E-mail alert, firmware upgradable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), DHCP server, LLDP support, Link Aggregation Control Protocol (LACP), port based access control, Dynamic VLAN Support (GVRP)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1x, IEEE 802.1ab (LLDP)
RAM32 MB
Flash Memory4 MB
Status IndicatorsPort transmission speed, power, fail, link/activity, diagnostic
Expansion / Connectivity
Interfaces8 x 100Base-TX - RJ-45
1 x console - DB-9 - management
2 x 1000Base-T - RJ-45
2 x SFP (mini-GBIC)
Power
Power DeviceInternal power supply
Voltage RequiredDC 12 - 48 V
Power Consumption Operational8.1 Watt
Miscellaneous
MTBF272,761 hours
Compliant StandardsFCC Class A certified, cUL, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-6-2, EN 61000-4-8, UL 60950-1, EN 61000-6-4, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6
Dimensions & Weight
Approximate Width17.5 in
Approximate Depth12.7 in
Approximate Height1.7 in
Approximate Weight3 lbs
Environmental Parameters
Min Operating Temperature14 °F
Max Operating Temperature140 °F
Humidity Range Operating5 - 95% (non-condensing)
Min Storage Temperature-40 °F
Max Storage Temperature185 °F

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0772 seconds