Azden SGM 1X

Mfg Part #: SGM-1X


Azden SGM 1X

Ordering Information
MSRP$230.00
Our Price$170.97
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Designed for video and audio professionals, the SGM-1X is a directional super-cardioids shotgun microphone with a wide frequency response and low noise levels. The SGM-1X is supplied with a shock-mount holder. This holder can be used on a camera shoe or on a microphone stand. Push the barrel through the center of the elastic bands until it is positioned as shown. To secure the holder to a camera shoe, slide the holder into the camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder to a microphone stand, screw the holder to the stand by turning it clockwise until it is tight.

Shock-mount holder
The SGM-1X is supplied with a shock-mount holder. This holder can be used on a camera shoe or on a microphone stand. Push the barrel through the center of the elastic bands until it is positioned as shown. To secure the holder to a camera shoe, slide the holder into the camera shoe and tighten the thumbwheel by turning it clockwise. To secure the holder to a microphone stand, screw the holder to the stand by turning it clockwise until it is tight.

Power switch
The SGM-1X has a 2-position power switch.

Low-cut switch
The SGM-1X has a "low-cut" filter switch that is designed to reduce unwanted low frequencies from entering the audio. This will reduce low frequency energy created from things like air conditioner compressors. The frequency response is "flat" when the switch is in the position while the low frequencies are reduced when the switch in the position.

Microphone output
The SGM-1X has a balanced XLR output and will work in any low impedance microphone input of 1K ohm or less.


In The Box
  • Azden SGM 1X
  • Wind screen


General Specifications

ManufacturerAzden
Manufacturer Part #SGM-1X
Manufacturer UPC #0095528060032
Cost Central Item #10884479
Product DescriptionAzden SGM 1X - Microphone
Product TypeMicrophone
Recommended UseProfessional audio system
Headphones TypeMicrophone
MicrophoneExternal - shoe mount

Extended Specifications

General
Product TypeMicrophone
Diameter0.8 in
Length1 ft
Approximate Weight4.8 oz
Recommended UseProfessional audio system
Headphones
Headphones TypeMicrophone
Microphone
TypeExternal - shoe mount
Connectivity TechnologyWired
Sensitivity-41 dBV/Pascal
Impedance680 Ohm
Response Bandwidth80 - 18000 Hz
Signal-To-Noise Ratio65 dB
Noise Level-65 dB
Dynamic Range80 dB
Max Sound Pressure110 dB
Connections
Connector TypeMicrophone ( XLR )
Miscellaneous
Included AccessoriesWind screen
Power
Battery1 x battery - AAA type
Run Time (Up To)1000 hour(s)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0631 seconds