B&B Electronics B&B EIS-S-SC

Mfg Part #: EIS-S-SC

B&B Electronics B&B EIS-S-SC
Ordering Information
Our Price$243.55
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

Extend Ethernet distances
Media converters do more than just convert copper Ethernet signals to fiber. They allow the Ethernet LAN to be extended beyond the normal 100 meter limit. By using a pair of media converters, LANs can be extended up to 20 km with single-mode fiber. Extension of LAN distances now make it possible to communicate with remotely located Ethernet enabled devices that were not formerly possible to reach in the past. The application could be as simple as getting data from one end of the warehouse to the other, tying two buildings together, enabling communications in a tank farm, or monitoring a SCADA system at a waste water plant.

Isolate and protect
Another great benefit inherently built into a media converter is the isolation factor. Since the data is communicating via a fiber optic connection, the data is transmitted by light - therefore no conductive wires connect the far ends of the system. This eliminates the potential for ground loop problems and offers additional protection from RFI/EMI interference that may be present along the cable run.

Reliable desk/wall/rack mount media converters
The EIS series media converters are stand alone products that come with a power supply or have the option to be mounted in a 19 inch rack chassis. The rack system holds up to 16 of the EIS products and includes one power supply that will provide power to each of the EIS models via the backplane. Use of two power supplies provides a load-sharing service that will add redundancy to your system.

Product Highlights
  • 10/100Base (Gigabit) models
  • Auto negotiation of data rate and duplex modes
  • MDI/MDI-X (auto-cross feature)
  • LEDs for power, link/activity, data rate, duplex/collision

General Specifications

ManufacturerB&B Electronics
Manufacturer Part #EIS-S-SC
Manufacturer UPC #0835788107982
Cost Central Item #11483303
Product DescriptionB&B EIS-S-SC - Media converter - RJ-45 / SC single mode
Device TypeMedia converter - RJ-45 / SC single mode
Form FactorExternal
Cabling Type10Base-T, 100Base-FX, 100Base-TX
Data Transfer Rate100 Mbps
Data Link ProtocolEthernet, Fast Ethernet
Approximate Dimensions (WxDxH)4.3 in x 3.1 in x 0.9 in
Approximate Weight5.3 oz

Extended Specifications

Device TypeMedia converter
Form FactorExternal
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-FX, 100Base-TX
Data Link ProtocolEthernet, Fast Ethernet
Data Transfer Rate100 Mbps
FeaturesAuto-uplink (auto MDI/MDI-X), store and forward, half duplex mode, full duplex mode
Compliant StandardsIEEE 802.3, IEEE 802.3u
Expansion / Connectivity
Interfaces1 x Ethernet 10Base-T/100Base-TX - RJ-45
1 x Ethernet 100Base-FX - SC single mode x 2
Compatible Slots1 x expansion slot
Compliant StandardsEN 60950, IEC 60950, UL 60950, FCC Part 15 A
Power DeviceExternal power adapter
Power Consumption Operational3.4 Watt
Dimensions & Weight
Approximate Width4.3 in
Approximate Depth3.1 in
Approximate Height0.9 in
Approximate Weight5.3 oz
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating10 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0592 seconds