Home > Input Devices > Web Cams > Bosch Group Web Cams > Bosch Group Bosch Dinion2X LTC 0630/21

Bosch Group Bosch Dinion2X LTC 0630/21

Mfg Part #: LTC0630/21


Bosch Group Bosch Dinion2X LTC 0630/21

Ordering Information
MSRP$844.60
Our Price$480.63
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The LTC 0630 Dinion2X day/night camera is a high-performance, surveillance camera. It uses a 1/2-inch CCD sensor and incorporates advanced digital signal processing for outstanding picture performance.

The advanced image processing enhances sensitivity; the improved XF-Dynamic engine extends the dynamic range. This unique combination provides a sharper, more detailed image with outstanding accuracy in color reproduction even under harsh lighting conditions.

The Dinion2X camera is easy to install and ready to use, and offers the best solution for demanding scene conditions. The day/night feature ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome.

All Dinion cameras are supplied ready to operate. Simply attach the lens, connect video and then power. Six distinct pre-programmed operational modes are stored in the camera. Recall the mode that suits your application for optimized performance.

The camera automatically detects the lens type. The lens wizard ensures accurate back-focusing for perfectly sharp pictures at all times. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and an On-screen Display (OSD).

XF-Dynamic and image processing
Improved XF-Dynamic technology and highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. The Dinion2X maximizes the information visible in the picture even with strong backlighting.

Day/night mode
The day/night mode provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input. The filter can be switched manually via the alarm input, through the camera menu or via the Bilinx coaxial control interface. An internal through-the-lens IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is dominant. IR contrast is also measured and used to handle reflected IR light in outdoor scenes.

Default shutter
The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.

Bilinx technology
Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate set-up and adjustment, and improves overall performance. In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

Lens Wizard
The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to ensure proper focus is maintained throughout the 24-hour cycle. No special tools or filters are required.

Programmable modes
Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations. Switching between modes is easy via Bilinx or the external alarm input.

Video motion detection
The built-in video motion detector allows you to select a programmable area with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting. When motion is detected, alarms can be displayed in the video signal, the output relay can be closed or an alarm message can be transmitted via Bilinx.

SensUp dynamic
By increasing the integration time up to 10 times on the CCD, the effective sensitivity is dramatically enhanced. This is especially useful when relying only on moonlight for illumination.


Product Highlights
  • Advanced Image Processing technology
  • Improved XF-Dynamic engine with SmartBLC
  • Detail enhancement
  • True day/night performance with switchable filter


General Specifications

ManufacturerBosch Group
Manufacturer Part #LTC0630/21
Manufacturer UPC #0800549180214
Cost Central Item #11197934
Product DescriptionBosch Dinion2X LTC 0630/21 - Analog camera - outdoor - color ( Day&Night ) - 768 x 494 - C/CS-mount - auto and manual iris - vari-focal - 540 TVL - DC 12 V / AC 24 V
Device TypeAnalog camera - fixed - outdoor
Approximate Dimensions (WxDxH)2.6 in x 4.8 in x 2.3 in
Approximate Weight15.9 oz
ColorTitanium metallic, RAL 9007
CameraColor - Day&Night - 540 TVL - NTSC
Optical Sensor TypeCCD - 1/2" - 768 x 494
Focal Length ControlVari-focal
Lens MountingC/CS-mount
Focus AdjustmentAutomatic
Lens IrisAuto and manual iris ( DC, video )
InterfacesComposite video
VoltageDC 12 V / AC 24 V
FeaturesManual white balance, auto white balance, auto gain control, Privacy Mask Function, Video Motion Detector (VMD)
Environmental Parameters (operating)-4 °F - 131 °F ; 20 - 93% relative humidity

Extended Specifications

General
Device TypeAnalog camera
Approximate Width2.6 in
Approximate Depth4.8 in
Approximate Height2.3 in
Approximate Weight15.9 oz
Camera
TypeColor - Day&Night - fixed - outdoor
Video FormatNTSC
Horizontal Resolution (TV Lines)540
Exposure Range1/50 ns - 1/50000 ns
FeaturesManual white balance, auto white balance, auto gain control, Privacy Mask Function, Video Motion Detector (VMD)
Image Sensor
TypeCCD 1/2"
Lens Construction
TypeC/CS-mount - vari-focal
Lens IrisAuto and manual iris ( DC, video )
Focus AdjustmentAutomatic
Interfaces
VideoComposite video
Alarm Inputs Qty1
Alarm Outputs Qty1
Miscellaneous
Compliant StandardsCSA, UL, EN 61000-3-2, UL 1950, UL 60950, EN55022 Class B, FCC Part 15 B, FCC, EN50130-4, EN 60950-1, IEC 60068-2-6, CSA C22.2 No. 950
ColorTitanium metallic, RAL 9007
Power
Power RequirementsDC 12 V / AC 24 V
Environmental Parameters
Min Operating Temperature-4 °F
Max Operating Temperature131 °F
Relative Humidity (operating)20 - 93%

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1221 seconds