TCPUL23FF-GM Multimedia Presentation Cart is an ideal platform for presentation electronics where multiple laptops are used throughout the day. Complete multimedia cart supports a data projector, document camera, DVD player, sound system, audio mixer, and any 19" rack mounted electronic equipment.
Antimicrobial properties are incorporated into a power paint finish and applied during the finishing process, forming a protective barrier that covers the entire product. Steel surface coatings use a natural chemical reaction to inhibit activity in the cell wall membrane. The antimicrobial finish is colorless, odorless, will not wash off, and remains effective for the useful life of the product.
TCP23 series carts feature a welded cabinet assembly comprised of 18-gauge steel 1" square tube corner supports which are welded to an 18-gauge steel top shelf with 18-gauge steel stiffener, an 18-gauge steel middle shelf, and an 18-gauge steel bottom shelf. All three shelves include a 3" diameter grommet hole on the left centered side of the cart. A full length left and right side panel are 18-gauge steel and welded in place. The left side panel includes a dual gang cut out at the top for the installation of a pass through plate, a side handle which extends 2-3/4" off at the top shelf, and a cord winder at the bottom section. The dual gang cut out is covered with an 18-gauge steel plate when no pass through is used. Two left side panel holes are included to mount an optional external electrical unit. A full-length 18-gauge steel rear door provides rear access and is formed to wrap around to secure to the side panel with a magnet when the cart is in use. The front includes a flip down projector door at the top and a half cord access door at the bottom. Both front doors are constructed from 18-gauge steel. All three doors include a key lock assembly for security and all doors are keyed alike. All doors and side panels are perforated to allow electronic equipment to ventilate when in use. The bottom corners of the cabinet have hard plastic caster inserts mounted into the leg tubes for installation of stem casters. Each cart includes four 4" twin wheel stem casters load rated for 115 lbs each. Two casters have locking brakes.
19" rack mount rails
Each cart includes one set of 19" rack mount rails with 14 unit spacing. Two 17-1/2w x 14-1/2d accessory shelves are included for non-rack mounted equipment.
Pull out notebook shelf
Pull out notebook shelf extends 11-3/4" from the back side and mounts directly below the top shelf inside the cabinet. The shelf is only accessible when the full length rear door is open. The notebook shelf may be used as a flat surface or turned over for a tray. When used as a tray the shelf provides temporary storage space for notebook computers.
Pull out projector shelf
Shelf has a 6" projector height clearance when retracted inside the upper cabinet. The shelf should be extended from the cart when in use to allow projectors to dissipate heat more effectively when in use.
Carts use 4" diameter stem casters and may be ordered with plastic twin wheel casters or hard rubber casters. All casters swivel, two include a locking brake, and all are rated for 115 lbs. each.