Brother NC 8100h

Mfg Part #: NC8100H


Brother NC 8100h

Ordering Information
MSRP$262.49
Our Price$145.14
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The Brother NC-8100h Print / Fax Server allows your Brother MFC to be attached and shared on a 10/100Mbit Ethernet Network. Web Based Management and Administration utilities provide easy configuration and management of your Brother MFC. Once installed and configured, the NC-8100h allows your MFC machine to FAX documents over the Internet; print and scan documents over a network. The NC-8100h is even supplied with Brother's Peer to Peer printing software allowing you to easily share the machine as a small department printer.



General Specifications

ManufacturerBrother
Manufacturer Part #NC8100H
Manufacturer UPC #0012502601166
Cost Central Item #10178176
Product DescriptionBrother NC 8100h - Print server - expansion slot - 10Mb LAN, 100Mb LAN - 10Base-T, 100Base-TX - for IntelliFAX 4750e; MFC 5200c
Device TypePrint server
Form FactorPlug-in module
Interface (Bus) TypeExpansion slot
Cabling TypeEthernet 10Base-T, Ethernet 100Base-TX
Data Link Protocol10Mb LAN, 100Mb LAN
Data Transfer Rate100 Mbps
Network / Transport ProtocolTCP/IP, IPX/SPX, AppleTalk, UDP/IP, DLC/LLC, NetBEUI/NetBIOS, IP/IPX
Compliant StandardsIEEE 802.3, IEEE 802.3u
System RequirementsUNIX, Microsoft Windows 95/98, Novell NetWare, Apple MacOS 9, Apple MacOS 8.6 or later, Microsoft Windows 2000 / NT4.0, Apple MacOS 9.0.4, Microsoft Windows Millennium Edition, Apple MacOS 8.6.1, Apple MacOS 9.1, Apple MacOS 8.7
Designed ForIntelliFAX 4750e; MFC 5200c

Compatible With

Extended Specifications

General
Device TypePrint server
Form FactorPlug-in module
Interface (Bus) TypeExpansion slot
Networking
Connectivity TechnologyWired
Cabling TypeEthernet 10Base-T, Ethernet 100Base-TX
Data Link Protocol10Mb LAN, 100Mb LAN
Data Transfer Rate100 Mbps
Network / Transport ProtocolTCP/IP, IPX/SPX, AppleTalk, UDP/IP, DLC/LLC, NetBEUI/NetBIOS, IP/IPX
Remote Management ProtocolSNMP, Telnet, HTTP
FeaturesAuto-sensing per device, DHCP support, BOOTP support, manageable
Compliant StandardsIEEE 802.3, IEEE 802.3u
Expansion / Connectivity
Compatible Slots1 x expansion slot
Connections1 x network - Ethernet 10Base-T/100Base-TX - RJ-45
Miscellaneous
Mounting KitStandard
Package TypeRetail
Software / System Requirements
Software IncludedDrivers & Utilities
OS RequiredUNIX, Microsoft Windows 95/98, Novell NetWare, Apple MacOS 9, Apple MacOS 8.6 or later, Microsoft Windows 2000 / NT4.0, Apple MacOS 9.0.4, Microsoft Windows Millennium Edition, Apple MacOS 8.6.1, Apple MacOS 9.1, Apple MacOS 8.7
Compatibility Information
Designed ForBrother IntelliFAX 4750e
Brother MFC 5200c

Available Compatible Products

DescriptionMfg Part #StockPrice 
Brother IntelliFAX 4750eBrother IntelliFAX 4750e
Fax / copier - B/W - laser - 8.5 in width (original) - Legal (216 x 356 mm) (media) - up to 15 ppm (copying) - up to 15 ppm (printing) - 250 sheets - 33.6 Kbps - parallel, USB
PPF-4750E No $476.01 Buy Now

Customer Reviews

Review Summary Write a Review
Excellent (0 reviews)
Good (0 reviews)
Average (1 review)
Poor (0 reviews)
Very Poor (0 reviews)

Review Date: Oct 08, 2007

Jeff M.

Strengths: Card was easy to install in a Brother 4750e Fax and worked fine - on the hardware side.

Weaknesses: The software Brother uses to enable networking their 4750e Fax via this card is horrific. It took (4) hours with tech support and then it corrupted and they wanted to start over!!!!!!!!!! Needless to say, the card was returned.

Summary: The card worded fine, but the supporting software - at least for use with a Brother 4750e Fax - is terrible. Skip the aggravation.

1 out of 1 people found this review helpful.

Was this review helpful or unhelpful for you?

User Rating


Product Experience
Less than a Week

Leave a Comment

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0755 seconds