Home > Networking > Switches > Cisco Switches > Cisco Catalyst 4928 10 Gigabit Ethernet Switch

Cisco Catalyst 4928 10 Gigabit Ethernet Switch

Mfg Part #: WS-C4928-10GE


Cisco Catalyst 4928 10 Gigabit Ethernet Switch

Ordering Information
MSRP$43,500.00
Our Price$28,313.92
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The Cisco Catalyst 4928 10 Gigabit Ethernet Switch is a wire-speed, Layer 2 to 4, 1-rack-unit (1RU) switch designed for space-constrained LAN distribution and core applications. This switch offers exceptional performance, bandwidth, and reliability for medium-density, multilayer aggregation of high-performance LAN access switches. High performance and scalability of intelligent network services are made possible with dedicated specialized resources known as ternary content addressable memory (TCAM). Ample TCAM resources (64,000 entries) enable high feature capacity, providing wire-speed routing and switching performance with concurrent provisioning of services such as quality of service (QoS) and security, helping ensure scalability for today's network requirements with ample room for future growth.

The Cisco Catalyst 4928 10 Gigabit Ethernet Switch offers flexible and highly available aggregation solutions for nonstop unified network services. Enterprise-grade features such as dynamic routing, dual hot-swappable power supplies, and redundant field-replaceable fans enhance switch availability.

The switch is well-suited for space- and power-constrained deployments because of its compact 1RU form factor, economical power needs, and efficient cooling. Ideally suited to support secure converged applications such as Cisco TelePresence and Cisco Unified Communications, the switch delivers high-performance intelligent switching with its robust feature set.

Wire-speed performance in all directions
The Cisco Catalyst 4928 10 Gigabit Ethernet Switch delivers wire-speed throughput with low latency for data-intensive applications using a 96-Gbps switching fabric with a forwarding rate of 72 million packets per second (mpps) in hardware for Layer 2 to 4 traffic. High-performance switching is maintained regardless of the number of route entries or Layer 3 and 4 services enabled. Hardware-based Cisco Express Forwarding routing architecture enables increased scalability and performance. X2 10 Gigabit Ethernet optics provide 20 Gigabit Ethernet wire-speed uplinks for maximum traffic throughput.

Power-supply redundancy for nonstop operations
The Cisco Catalyst 4928 10 Gigabit Ethernet Switch provides reliability for critical applications with 1 + 1 redundant, hot-swappable internal AC or DC power supplies. The 1 + 1 power supply design provides A-to-B failover when power supplies are connected to different circuits. You can mix AC and DC power supplies in the same unit for maximum deployment flexibility. The switch also has a hot-swappable fan tray with four redundant fans for additional serviceability and availability.

Comprehensive management
The Cisco Catalyst 4928 10 Gigabit Ethernet Switch includes a single, dedicated 10/100 console port and a single, dedicated 10/100 management port for offline disaster recovery and remote out-of-band management. Remote in-band management is available with the Simple Network Management Protocol (SNMP), Telnet Client, Bootstrap Protocol (BOOTP), and Trivial File Transfer Protocol (TFTP). The management port has two operating modes designed to increase operational efficiency and availability. During normal system operation the management port operates as a standard out-of-band management port. Network administrators can use standard command-line interface (CLI) commands to monitor and configure the switch without interrupting the data flow. The Cisco Catalyst 4928 10 Gigabit Ethernet Switch delivers a comprehensive set of management tools to provide the visibility and control required for LAN switching. These web-based management tools offer numerous services, including software deployment and quick isolation of error conditions.


Our company is a Cisco authorized sales center.

Per Cisco policy, all Cisco sales must be shipped to the end-user customer. Please contact us at 1-866-469-2678 for details or questions.

General Specifications

ManufacturerCisco
Manufacturer Part #WS-C4928-10GE
Manufacturer UPC #0882658216770
Cost Central Item #10634599
Product DescriptionCisco Catalyst 4928 10 Gigabit Ethernet Switch - Switch - L3 - managed - 28 x Gigabit SFP + 2 x X2 - rack-mountable
Device TypeSwitch - 28 ports - L3 - managed
Enclosure TypeRack-mountable 1U
SubtypeGigabit Ethernet
Ports28 x Gigabit SFP + 2 x X2
PerformanceSwitching capacity : 96 Gbps
Throughput : 71 Mpps
CapacityActive VLANs : 2048
Spanning Tree Protocol instances : 10000
Switched virtual interfaces (SVIs) : 2000
QoS hardware entries : 32000
Multicast entries (Layer 3) : 28000
Multicast entries (Layer 2) : 16000
MAC Address Table Size55K entries
Jumbo Frame Support9216
Routing ProtocolRIP-1, RIP-2, static IP routing
Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, HTTP, HTTPS, TFTP, CLI
FeaturesLayer 3 switching, layer 2 switching, auto-sensing per device, IP-routing, auto-negotiation, BOOTP support, ARP support, trunking, Cisco Fast EtherChannel, load balancing, VLAN support, Cisco Gigabit EtherChannel , IGMP snooping, ISL support, Syslog support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Per-VLAN Spanning Tree (PVST), Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), Time Domain Reflectometry (TDR), WCCP 2.0, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag
Power RedundancyOptional
Approximate Dimensions (WxDxH)17.3 in x 16.1 in x 1.7 in
Approximate Weight16.5 lbs
Manufacturer Warranty90 days warranty

Extended Specifications

General
Device TypeSwitch - 28 ports - L3 - managed
Enclosure TypeRack-mountable - 1U
SubtypeGigabit Ethernet
Ports28 x Gigabit SFP + 2 x X2
PerformanceSwitching capacity : 96 Gbps
Throughput : 71 Mpps
CapacityActive VLANs : 2048
Spanning Tree Protocol instances : 10000
Switched virtual interfaces (SVIs) : 2000
QoS hardware entries : 32000
Multicast entries (Layer 3) : 28000
Multicast entries (Layer 2) : 16000
MAC Address Table Size55K entries
Jumbo Frame Support9216
Routing ProtocolRIP-1, RIP-2, static IP routing
Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, HTTP, HTTPS, TFTP, CLI
Authentication MethodSecure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
FeaturesLayer 3 switching, layer 2 switching, auto-sensing per device, IP-routing, auto-negotiation, BOOTP support, ARP support, trunking, Cisco Fast EtherChannel, load balancing, VLAN support, Cisco Gigabit EtherChannel , IGMP snooping, ISL support, Syslog support, manageable, MAC address filtering, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Per-VLAN Spanning Tree (PVST), Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), Time Domain Reflectometry (TDR), WCCP 2.0, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag
Processor1 : 666 MHz
RAM256 MB - SDRAM
Flash MemoryFlash
Status IndicatorsSystem, status, console
Expansion / Connectivity
Interfaces28 x SFP (mini-GBIC)
1 x console - RJ-45 - management
1 x 100Base-TX - RJ-45 - management
2 x X2
Power
Power DeviceInternal power supply - hot-plug
Installed Qty0 (installed) / 2 (max)
Power RedundancyOptional
Power Redundancy Scheme1+1 (with optional power supply)
Miscellaneous
Compliant StandardsNEBS level 3, FCC Class A certified, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, EN55022, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, EN 61000-6-1, ICES-003 Class A, FCC CFR47 Part 15, AS/NZS 60950, CAN/CSA C22.2 No. 60950
Software / System Requirements
Software IncludedCisco IOS IP Base
Dimensions & Weight
Approximate Width17.3 in
Approximate Depth16.1 in
Approximate Height1.7 in
Approximate Weight16.5 lbs
Manufacturer Warranty
Service & Support90 days warranty
Service & Support DetailsLimited warranty - advance parts replacement - 90 days - response time: 10 days
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 90% (non-condensing)
Min Storage Temperature-40 °F
Max Storage Temperature167 °F

Available Accessories & Related Products

Accessories - System & Power Cables
DescriptionMfg Part #StockPrice 
Cisco - Power cable (250 VAC)Cisco - Power cable (250 VAC)
Power cable (250 VAC) - NEMA 6-15 (M) - IEC 320 EN 60320 C13 - 8 ft - North America - for Catalyst 4928 10, 4948, 4948 10; Nexus 2148T, 5010, 5020
CAB-N5K6A-NA= No $32.68

Networking - Network Accessories
DescriptionMfg Part #StockPrice 
Cisco - Network device mounting bracketCisco - Network device mounting bracket
Network device mounting bracket - for Catalyst 4900M, 4908G-L3, 4912G, 4928 10, 4948, 4948 10
C4948-BKT-REC= No $37.34

Networking - Repeater / Transceiver
DescriptionMfg Part #StockPrice 
Cisco TwinGig Converter ModuleCisco TwinGig Converter Module
X2 transceiver module - 2 ports - 1000Base-X - plug-in module - refurbished - for P/N: WS-C3560E-12D-E=, WS-X45-SUP6-E=PRE, WS-X4606-X2-E-RF, WS-X6816-10G-2TXL=
CVR-X2-SFP-RF No $58.02
Cisco - X2 transceiver moduleCisco - X2 transceiver module
X2 transceiver module - SC/PC single mode - 1538.98 nm - for Catalyst 3560, 49XX 10; Nexus 8; Virtual Switching Supervisor Engine 720
DWDM-X2-38.98= No $12,989.12
Cisco - X2 transceiver moduleCisco - X2 transceiver module
X2 transceiver module - SC/PC single mode - 1555.75 nm - for Catalyst 3560, 49XX 10; Nexus 8; Virtual Switching Supervisor Engine 720
DWDM-X2-55.75= No $12,989.12
Cisco X2 - X2 transceiver moduleCisco X2 - X2 transceiver module
X2 transceiver module - SC multi-mode - up to 720 ft - 1310 nm - refurbished - for Catalyst 3560E-12, 3560E-24, 3560E-48
X2-10GB-LRM-RF No $593.31
Cisco - X2 transceiver moduleCisco - X2 transceiver module
X2 transceiver module - SC multi-mode - up to 49.7 miles - 1550 nm - refurbished - for P/N: WS-C4928-10GE, WS-X45-SUP6-E-RF, WS-X6708-10G-3C-RF, WS-X6708-10G-3CXL-RF
X2-10GB-ZR-RF No $3,600.08
Cisco - X2 transceiver moduleCisco - X2 transceiver module
X2 transceiver module - SC multi-mode - up to 49.7 miles - 1550 nm - for P/N: WS-C4928-10GE, WS-X45-SUP6-E-RF, WS-X6708-10G-3C-RF, WS-X6708-10G-3CXL-RF
X2-10GB-ZR= No $10,391.41

Service and Support - Networking
DescriptionMfg Part #StockPrice 
Cisco SMARTnet OnsiteCisco SMARTnet Onsite
Extended service agreement - replacement - on-site - 8x5 - NBD - for P/N: WS-C4928-10GE
CON-OS-C4928GE No $4,568.00
Cisco SMARTnet Onsite EnhancedCisco SMARTnet Onsite Enhanced
Extended service agreement - replacement - on-site - 8x5 - 4 h - for P/N: WS-C4928-10GE
CON-OSE-C4928GE No $6,624.00
Cisco SMARTnet Onsite PremiumCisco SMARTnet Onsite Premium
Extended service agreement - replacement - on-site - 24x7 - 4 h - for P/N: WS-C4928-10GE
CON-OSP-C4928GE No $7,309.00
Cisco SMARTnet Onsite PremiumCisco SMARTnet Onsite Premium
Extended service agreement - replacement - on-site - 24x7 - 2 h - for P/N: WS-C4928-10GE
CON-PREM-C4928GE No $9,136.00
Cisco SMARTnet PremiumCisco SMARTnet Premium
Extended service agreement - replacement - 24x7 - 2 h - for P/N: WS-C4928-10GE
CON-S2P-C4928GE No $7,765.00
Cisco SMARTnet - Extended service agreementCisco SMARTnet - Extended service agreement
Extended service agreement - replacement - 8x5 - NBD - for P/N: WS-C4928-10GE
CON-SNT-C4928GE No $3,654.00
Cisco SMARTnet EnhancedCisco SMARTnet Enhanced
Extended service agreement - replacement - 8x5 - 4 h - for P/N: WS-C4928-10GE
CON-SNTE-C4928GE No $5,298.00
Cisco SMARTnet PremiumCisco SMARTnet Premium
Extended service agreement - replacement - 24x7 - 4 h - for P/N: WS-C4928-10GE
CON-SNTP-C4928GE No $5,846.00

Software - Operating Systems
DescriptionMfg Part #StockPrice 
Cisco IOS Enterprise Services with 3DESCisco IOS Enterprise Services with 3DES
( v. 12.2(54)SG ) - complete package - Triple DES - for Catalyst 4928 10 Gigabit Ethernet Switch, 4948, 4948 10 Gigabit Ethernet Switch
S49ESK9-12254SG= No $2,610.00

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1124 seconds