Home > Networking > Switches > Cisco Switches > Cisco Nexus 4001I Switch Module for IBM Blade Center

Cisco Nexus 4001I Switch Module for IBM Blade Center

Mfg Part #: N4K-4001I-XPX


Cisco Nexus 4001I Switch Module for IBM Blade Center

Ordering Information
MSRP$11,315.00
Our Price$7,365.31
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The Cisco Nexus 4001I Switch Module for IBM Blade Center is a blade switch solution for IBM Blade Center H and HT chassis, providing the server I/O solution required for high-performance, scale-out, virtualized and nonvirtualized x86 computing architectures. It is a line-rate, extremely low-latency, nonblocking, Layer 2, 10 Gigabit Ethernet blade switch that is fully compliant with the INCITS Fiber Channel over Ethernet (FCoE) and IEEE 802.1 Data Center Bridging (DCB) standards.

At the center of the Cisco Nexus 4001I is the unified switch application-specific integrated circuit (ASIC), a purpose-built, high-performance, line-rate switch ASIC that delivers extremely low and consistent latency across all packet sizes independent of the configured networking features. The unified switch ASIC supports standard Ethernet as well as Priority Flow Control (PFC) and Enhanced Transmission Selection, required for lossless Ethernet transmission. Using the combination of the unified switch ASIC and Cisco NX-OS, the Cisco Nexus 4001I extends the benefits of the Cisco Nexus family of data center switches to blade servers: the fastest growing segment of the server market.

Lower total cost of operation (TCO)
Deployment of unified fabric with the Cisco Nexus 4001I at the blade server access enables a significant reduction in the number of switches, LAN and SAN network interface cards (NICs), ports, optic modules, and cables. This consolidation of server access network elements significantly reduces the overall capital and operation costs of the data center network through reduction in the number of network elements that need to be purchased, managed, powered, and cooled.

High performance
The Cisco Nexus 4001I is a line-rate, feature-rich, extremely low-latency switch capable of enabling server access migration from Gigabit Ethernet to 10 Gigabit Ethernet to lossless 10 Gigabit Ethernet, as well as supporting the demanding latency requirements of high-performance computing (HPC) clusters and high-frequency trading applications.

Enhanced server virtualization
Using unified fabric at the server access with Cisco Nexus 4001I provides the uniform interfaces, simplified cabling, and consistent server access design required to gain the advantages of automated virtual machine mobility. The Cisco Nexus 4001I delivers an operationally consistent and transparent server access design for virtual machine deployments, substantially reducing the overhead needed to configure, troubleshoot, and repair the server access link between the virtual NIC (vNIC), virtual switch, and the blade switch.

Increased resilience
The Cisco Nexus 4001I extends Cisco NX-OS to the blade server access, providing a fault-tolerant network with single modular operating system across the data center.


Our company is a Cisco authorized sales center.

Per Cisco policy, all Cisco sales must be shipped to the end-user customer. Please contact us at 1-866-469-2678 for details or questions.

General Specifications

ManufacturerCisco
Manufacturer Part #N4K-4001I-XPX
Cost Central Item #11146514
Product DescriptionCisco Nexus 4001I Switch Module for IBM Blade Center - Switch - managed - 14 x backplane + 6 x SFP+ - plug-in module - DC power
Device TypeSwitch - 20 ports - managed
Enclosure TypePlug-in module
Subtype10 Gigabit Ethernet
Ports14 x backplane + 6 x SFP+
MAC Address Table Size8K entries
Remote Management ProtocolSNMP 1, SNMP 2, RMON, SNMP 3
FeaturesLayer 2 switching, auto-sensing per device, auto-negotiation, VLAN support, Syslog support, DiffServ support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
Compliant StandardsIEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
PowerDC 12 V
Approximate Dimensions (WxDxH)11.6 in x 10.3 in x 0.8 in
Approximate Weight4 lbs

Extended Specifications

General
Device TypeSwitch - 20 ports - managed
Enclosure TypePlug-in module
Subtype10 Gigabit Ethernet
Ports14 x backplane + 6 x SFP+
MAC Address Table Size8K entries
Remote Management ProtocolSNMP 1, SNMP 2, RMON, SNMP 3
FeaturesLayer 2 switching, auto-sensing per device, auto-negotiation, VLAN support, Syslog support, DiffServ support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
Compliant StandardsIEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
RAM2 GB - DDR2 SDRAM
Flash Memory1 GB
Status IndicatorsPort status, power
Expansion / Connectivity
Interfaces1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - management
1 x console - RJ-45
Network : 14 x backplane
6 x SFP+
Power
Power DeviceInternal power supply
Voltage RequiredDC 12 V
Power Consumption Operational69 Watt
Miscellaneous
MTBF187,265 hours
Compliant StandardsTUV, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, IEC950, UL 1950, VDE, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, EMC, ICES-003 Class A, RoHS, FCC CFR47 Part 15, CSA C22.2 No. 950
Dimensions & Weight
Approximate Width11.6 in
Approximate Depth10.3 in
Approximate Height0.8 in
Approximate Weight4 lbs
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 85%

Available Accessories & Related Products

Service and Support - Networking
DescriptionMfg Part #StockPrice 
Cisco SMARTnet - Extended service agreementCisco SMARTnet - Extended service agreement
Extended service agreement - replacement - 8x5 - NBD - for P/N: N4K-4001I-XPX
CON-SNT-N4001I No $634.00
Cisco SMARTnet EnhancedCisco SMARTnet Enhanced
Extended service agreement - replacement - 8x5 - 4 h - for P/N: N4K-4001I-XPX
CON-SNTE-N4001I No $919.00
Cisco SMARTnet PremiumCisco SMARTnet Premium
Extended service agreement - replacement - 24x7 - 4 h - for P/N: N4K-4001I-XPX
CON-SNTP-N4001I No $1,014.00
Cisco SP BaseCisco SP Base
Technical support - phone consulting - 1 year - 24x7 - for P/N: N4K-4001I-XPX
CON-SW-N4001I No $445.67

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0718 seconds