Home > Networking > Network Adapters > Cisco Network Adapters > Cisco UCS 2104XP Fabric Extender

Cisco UCS 2104XP Fabric Extender

Mfg Part #: N20-I6584-RF


Cisco UCS 2104XP Fabric Extender

Ordering Information
MSRP$3,749.00
Our Price$848.61
FREE SHIPPING
ConditionRefurbished and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The first product in the Cisco UCS 2100 Series is the Cisco UCS 2104XP Fabric Extender. It has four 10 Gigabit Ethernet, FCoE-capable, Small Form-Factor Pluggable Plus (SFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2104XP has eight 10 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis. Typically configured in pairs for redundancy, two fabric extenders provide up to 80 Gbps of I/O to the chassis.


Product Highlights
  • Reduces TCO by removing management modules from the chassis, making the chassis stateless
  • Provides a single, highly available management domain for all system chassis, reducing administrative tasks
  • Simplifies operation by automatically synchronizing firmware levels between the fabric extenders and the interconnects
  • Decreases TCO by reducing the number of network interface cards (NICs), host bus adapters (HBAs), switches, and cables needed
  • Transparently encapsulates fiber channel packets into Ethernet
  • Increases availability with an active-active data plane
  • Reduces TCO by optimizing overall system capacity to match actual workload demands
  • Removes the need for chassis management modules
  • Provides a reliable, robust foundation for unifying LAN and SAN traffic on a single transport
  • Simplifies management of multiple traffic flows over a single network link
  • Supports different classes of service, enabling both lossless and classic Ethernet on the same fabric
  • Enables consistent and coherent quality-of-service (QoS) management throughout the system
  • Enables a consistent operational model between virtual and physical environments
  • Provides the same level of network visibility for virtualized and non-virtualized environments
  • Improves diagnostic and troubleshooting capabilities in a virtual environment
  • Simplifies network and security policy enforcement when migrating virtual machines from one host to another
  • Increases flexibility with a range of interconnect solutions, including copper Twinax cable for short runs and fiber for long runs
  • Consumes less power per port than traditional solutions

Our company is a Cisco authorized sales center.

Per Cisco policy, all Cisco sales must be shipped to the end-user customer. Please contact us at 1-866-469-2678 for details or questions.

General Specifications

ManufacturerCisco
Manufacturer Part #N20-I6584-RF
Cost Central Item #11614423
Product DescriptionCisco UCS 2104XP Fabric Extender - Expansion module - 10 Gigabit LAN - 4 ports - refurbished
Device TypeExpansion module
Form FactorPlug-in module
Approximate Dimensions (WxDxH)1.4 in x 7.2 in x 7.6 in
Approximate Weight2.4 lbs
Ports Qty4 ports
Data Link Protocol10 Gigabit LAN
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae
Pricing TypeRefurbished

Extended Specifications

General
Device TypeExpansion module - 4 ports
Form FactorPlug-in module
Approximate Width1.4 in
Approximate Depth7.2 in
Approximate Height7.6 in
Approximate Weight2.4 lbs
Networking
Connectivity TechnologyWired
Data Link Protocol10 Gigabit LAN
FeaturesVLAN support, Weighted Round Robin (WRR) queuing, High Availability, Data Center Bridging Exchange (DCBX) support, priority-based flow control, Quality of Service (QoS), Jumbo Frames support
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae
Expansion / Connectivity
Expansion Slot(s)4 (total) / 4 (free) x SFP+
Compatible Slots1 x expansion slot
Miscellaneous
Compliant StandardsCISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, RoHS, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, FCC CFR47
Pricing TypeRefurbished
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating5 - 95%

Available Accessories & Related Products

Networking - Network Cables
DescriptionMfg Part #StockPrice 
Cisco SFP+ Copper Twinax CableCisco SFP+ Copper Twinax Cable
Twinaxial cable - SFP+ - SFP+ - 33 ft - for Cisco 16, 4, 8; Nexus 2148, 2232PP 10, 22XX, 50XX, 55XX, 7000; UCS 2104, 61XX
SFP-H10GB-ACU10M No $271.06
Cisco SFP+ Copper Twinax CableCisco SFP+ Copper Twinax Cable
Twinaxial cable - SFP+ - SFP+ - 33 ft - active cable (signal regeneration) - for Cisco 16, 4, 8; Nexus 2148, 2232PP 10, 22XX, 50XX, 55XX, 7000; UCS 2104, 61XX
SFP-H10GB-ACU10M= No $266.48
Cisco SFP+ Copper Twinax CableCisco SFP+ Copper Twinax Cable
Twinaxial cable - SFP+ - SFP+ - 23 ft - for Cisco 16, 4, 8; Nexus 2148, 2232PP 10, 22XX, 50XX, 55XX, 7000; UCS 2104, 61XX
SFP-H10GB-ACU7M No $233.81
Cisco SFP+ Copper Twinax CableCisco SFP+ Copper Twinax Cable
Twinaxial cable - SFP+ - SFP+ - 23 ft - active cable (signal regeneration) - for Cisco 16, 4, 8; Nexus 2148, 2232PP 10, 22XX, 50XX, 55XX, 7000; UCS 2104, 61XX
SFP-H10GB-ACU7M= No $233.93

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1023 seconds