Home > Networking > Switches > D-Link Switches > D-Link DGS 3000-10TC

D-Link DGS 3000-10TC

Mfg Part #: DGS-3000-10TC


D-Link DGS 3000-10TC
Ordering Information
MSRP$409.99
Our Price$347.10
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The DGS-3000-10TC is part of the Layer 2 family of D-Link's managed switch product line that provides wired Gigabit speed access for metro and campus networks. The DGS-3000-10TC is designed as a 1U rackmount case suitable for enterprise access or service provider telecom cabinets, maximizing network performance without compromising on reliability and security. Green technology decreases energy costs by reducing power consumption, without compromising on performance.

All of the Ethernet ports of the DGS-3000-10TC support 6kV surge/lightning protection. This feature protects the switch from power surges due to lightning or improper electrical wiring when the Ethernet cables are exposed in open spaces, such as in old buildings. For Ethernet link fail-over, the DGS-3000-10TC supports 802.1D Spanning Tree Protocol (STP), 802.1w Rapid Spanning Tree Protocol (RSTP), and 802.1s Multiple Spanning Tree Protocol (MSTP), to allow automatic backup of bridge paths. Using these features, the transmission and reception of frames can be guaranteed even during a network failure. For mission critical environments, the switches also support ITU-I G.8032 Ethernet Ring Protection Switching (ERPS); traffic can be rerouted around the ring within 50 milliseconds, minimizing disruption to service. D-Link Loopback Detection (LBD) is a protocol-less loop detection function that prevent loop events from causing congestion in uncontrolled network segments such as unmanaged switches or customer networks. The DGS-3000-10TC also support 802.1AX and 802.3ad Link Aggregation, which allows grouping of multiple ports in parallel to increase bandwidth and redundancy for high availability and load sharing in a multi-client environment.

Virtual Stacking reduces the number of IP addresses needed on a network by configuring up to 32 devices to appear as a single unit with one IP address. This simplifies network management for small workgroups and allows for switches to be added without special cabling.

The DGS-3000-10TC offers various user/device authentication features including 802.1X, Web-based Access Control (WAC)1 and MAC-based Access Control (MAC). The clientless WAC1 and MAC functions provide convenience for IT managers implementing user/device authentication into a network. It permits administrators to control security without installing client software on each network device; this is especially important for devices on which the software cannot be installed. For a greater security level, the DGS-3000-10TC also supports Compound Authentication, letting IT managers choose between multiple authentication methods for any single device. Selectable host-based authentication and authorization provides the option to finely control access by each device in the network. For advanced applications, the switches also provide RADIUS and TACACS accounting information for integration of backend services such as a billing system or advanced user/device control. In mission critical networks, the DGS-3000-10TC supports strict address and interface binding function via IP-MAC-Port Binding and ARP Spoofing Prevention to protect the networks from Man-In-The-Middle or ARP Spoofing attacks.

To maintain a high availability network, the DGS-3000-10TC uses D-Link Safeguard Engine to manage the CPU and ensure that your network stays up even if it is overloaded by malicious traffic caused by worms and viruses. The switches also support DHCP Screening to filter out unauthorized DHCP offerings from rogue DHCP servers or routers. Other security features such as BPDU Attack Protection, Dos Attack Prevention, and L3 Control Packet Filtering help to block leaks caused by protocol or behavioral security intrusions.

Reliable networking
All Ethernet ports of the DGS-3000-10TC support 6 kV surge/lightning protection. This feature protects the switch from power surges due to lightning or improper electrical wiring when the Ethernet cables are exposed in open spaces, such as in older buildings. The switch also provides an additional power connector for connection to D-Link's DPS-200 Redundant Power Supply, or to a stable, protected 12VDC backup power source in case of a main power failure. For Ethernet link fail-over, the DGS-3000-10TC supports 802.1D Spanning Tree Protocol (STP), 802.1w Rapid Spanning Tree Protocol (RSTP), and 802.1s Multiple Spanning Tree Protocol (MSTP), to allow automatic backup of bridge paths. Using these features, the transmission and reception of frames can be guaranteed even during a network failure.

Solid security with high availability
The DGS-3000-10TC offers various user/device authentication features including 802.1X, Web-based Access Control (WAC) and MAC-based Access Control (MAC). The clientless WAC and MAC functions provide convenience for IT managers implementing user/device authentication into a network. They allow administrators to control security without installing client software on each network device, which is especially important for devices on which the software cannot be installed. For a greater security level, the DGS-3000-10TC also supports compound authentication, letting IT managers choose between multiple authentication methods for any single device. Selectable host-based authentication and authorization provide the option to finely control access by each device in the network.

IPv6 ready
The DGS-3000-10TC is IPv6 ready and supports various IPv6 functions such as MLD Snooping, WAC, IPv6 ACL/QoS, and IMPBv6 to ensure seamless integration of next generation networks. The DGS-3000-10TC is certified IPv6 Ready Logo Phase 2, which guarantees interoperability for IPv6 environments.

Easy maintenance and troubleshooting
The DGS-3000-10TC features rich Operations, Administration, and Management (OAM) features to help network administrators reduce the burden of maintenance and troubleshooting. Cable diagnostics display the status of Ethernet cables and locate the position of cable errors remotely, helping cut onsite support costs. 802.1ag Connectivity Fault Management (CFM) provides administrators with convenient tools to monitor and troubleshoot end-to-end service networks. This allows service providers to check connectivity, isolate network issues, and identify the affected customers.

Deliver triple play services
The DGS-3000-10TC features full L2 multicast functions, including IGMP/MLD snooping, fast leave, and filtering. With L2 multicast support, the switch is ideal for use with IPTV services. Host-based IGMP/MLD Snooping provides service to multiple IPTV subscribers per physical interface and ISM VLAN registers multicast streams in a multicast VLAN to save bandwidth on the network backbone. The ISM VLAN profiles allow users to bind or replace the channel profiles of subscription ports quickly and easily. The DGS-3000-10TC also supports IGMP authentication, which can prevent rogue IPTV subscriptions by authenticating set top boxes as well as channel switching to secure Internet Service Provider (ISP) revenues.



General Specifications

ManufacturerD-Link
Manufacturer Part #DGS-3000-10TC
Manufacturer UPC #0790069391361
Cost Central Item #11922181
Product DescriptionD-Link DGS 3000-10TC - Switch - managed - 8 x 10/100/1000 + 2 x combo Gigabit SFP - desktop, rack-mountable
Device TypeSwitch - 10 ports - managed
Enclosure TypeDesktop, rack-mountable 1U
InterfacesGigabit Ethernet
Ports8 x 10/100/1000 + 2 x combo Gigabit SFP
PerformanceSwitching capacity : 20 Gbps
Forwarding performance (64-byte packet size) : 14.88 Mpps
MAC Address Table Size16K entries
Jumbo Frame Support12KB
Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, SNMP 3
FeaturesFlow control, layer 2 switching, DHCP support, VLAN support, IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Cable Diagnostics Function, bandwidth control, LLDP support, Link Aggregation Control Protocol (LACP), Energy Efficient Ethernet, Strict Priority Queuing (SPQ)
Compliant StandardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX
PowerAC 120/230 V ( 50/60 Hz )
Approximate Dimensions (WxDxH)9 in x 7.7 in x 1.7 in
Approximate Weight2.4 lbs

Extended Specifications

General
Device TypeSwitch - 10 ports - managed
Enclosure TypeDesktop, rack-mountable - 1U
InterfacesGigabit Ethernet
Ports8 x 10/100/1000 + 2 x combo Gigabit SFP
PerformanceSwitching capacity : 20 Gbps
Forwarding performance (64-byte packet size) : 14.88 Mpps
MAC Address Table Size16K entries
Jumbo Frame Support12KB
Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, SNMP 3
Authentication MethodRADIUS, TACACS+
FeaturesFlow control, layer 2 switching, DHCP support, VLAN support, IGMP snooping, port mirroring, Weighted Round Robin (WRR) queuing, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Cable Diagnostics Function, bandwidth control, LLDP support, Link Aggregation Control Protocol (LACP), Energy Efficient Ethernet, Strict Priority Queuing (SPQ)
Compliant StandardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1v, IEEE 802.1ag, IEEE 802.1ab (LLDP), IEEE 802.3az, IEEE 802.1AX
RAM128 MB
Flash Memory32 MB
Expansion / Connectivity
Interfaces10 x 1000Base-T - RJ-45
1 x console - RJ-45 - management
2 x SFP (mini-GBIC)
Power
Power DeviceInternal power supply
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Consumption Operational16.5 Watt
FeaturesRedundant Power System (RPS) connector
Dimensions & Weight
Approximate Width9 in
Approximate Depth7.7 in
Approximate Height1.7 in
Approximate Weight2.4 lbs
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating10 - 90%
Min Storage Temperature-40 °F
Max Storage Temperature158 °F
Humidity Range Storage5 - 90%

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0738 seconds