Home > Accessories > UPS & Power > Eaton Corporation UPS & Power > Eaton Corporation Eaton STS 16 Source Transfer Switch

Eaton Corporation Eaton STS 16 Source Transfer Switch

Mfg Part #: 66028


Eaton Corporation Eaton STS 16 Source Transfer Switch

Ordering Information
MSRP$449.00
Our Price$225.47
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The Eaton STS 16 IEC is an affordable solution for customers willing to add power redundancy to high voltage networking equipment like switches and routers. This source transfer switch will power them from 2 different sources. Should one power source fail, the alternate one will switch over with no interruption to the connected equipment. Eaton STS can be connected to multiple devices at the same time while saving the cost of expensive redundant power supplies.


Product Highlights
  • Provides power redundancy to high voltage IT equipment
  • Alternative to expensive redundant power supplies from IT vendors
  • Compact, 1U rack form factor
  • Seamlessly switches from one power source to the other
  • Status information can be remotely checked
  • Can be used as an automatic By-Pass for any high voltage UPS <1,500 VA

Please note that this is the European model; please check the power requirements for this product. Please contact us at 1-866-469-2678 if you have any questions.



General Specifications

ManufacturerEaton Corporation
Manufacturer Part #66028
Cost Central Item #10330161
Product DescriptionEaton STS 16 Source Transfer Switch - Redundant switch ( rack-mountable ) - AC 208/230 V - RS-232 - 7 output connector(s) - 1U - 19" - for MGE UPS Pulsar EX15, EX20, EX30; Pulsar EXtreme 1500, 2000, 2500, 3000
Device TypeRedundant switch - rack-mountable
Rack Size19" - 1U
Approximate Weight11 lbs
Input VoltageAC 208/230 V
Output VoltageAC 208/230 V
Output connector(s)6 x power IEC 320 EN 60320 C13
1 x power IEC 320 EN 60320 C19
NetworkingRS-232
Approximate Dimensions (WxDxH)19 in x 9.8 in x 1.7 in
Manufacturer Warranty2 years warranty
Designed ForMGE UPS Pulsar EX15, EX20, EX30; Pulsar EXtreme 1500, 2000, 2500, 3000

Extended Specifications

General
Device TypeRedundant switch - rack-mountable
Height (Rack Units)1U
Rack Size19"
ColorBlack
Power Device
Input VoltageAC 208/230 V
Frequency Required50/60 Hz
Input Connector(s)2 x power IEC 320 EN 60320 C20
Power Output Connectors Details6 x power IEC 320 EN 60320 C13
1 x power IEC 320 EN 60320 C19
Output VoltageAC 208/230 V
Max Electric Current16 A
Networking
Remote Management InterfaceRS-232
Expansion / Connectivity
Interfaces1 x management (RS-232) - 9 pin D-Sub (DB-9)
Miscellaneous
Cables Included2 x power cable
Rack Mounting KitIncluded
FeaturesLED indicators
Compliant StandardsUL, TUV, cUL, EN 50091-1
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Dimensions & Weight
Approximate Width19 in
Approximate Depth9.8 in
Approximate Height1.7 in
Approximate Weight11 lbs
Compatibility Information
Designed ForMGE UPS Pulsar EX15, EX20, EX30
MGE UPS Pulsar EXtreme 1500 VA, 1500 VA Fault-tolerant, 1500 VA Hot-swap, 1500 VA Install, 2000 VA, 2000 VA Fault-tolerant, 2000 VA Hot-swap, 2000 VA Install, 2500 VA, 2500 VA Fault-tolerant, 2500 VA Hot-swap, 2500 VA Install, 3000 VA, 3000 VA Fault-tolerant, 3000 VA Hot-swap, 3000 VA Install

User Guides & Manuals


Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0603 seconds