Home > Networking > Network Accessories > Fluke Networks Network Accessories > Fluke Networks Fluke DTX Encircled Flux Multimode Fiber Module

Fluke Networks Fluke DTX Encircled Flux Multimode Fiber Module

Mfg Part #: DTX-EFM2


Fluke Networks Fluke DTX Encircled Flux Multimode Fiber Module
Ordering Information
MSRP$6,000.00
Our Price$5,357.81
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

As enterprise bandwidth demand increases, it is more important than ever for installers and network owners to certify and document that their fiber links meet established industry standards, to protect against network downtime and lost revenue.

The Fluke Networks DTX-EFM2 Encircled Flux Multimode Modules for the DTX CableAnalyzer enable you to easily and accurately test while ensuring compliance. EF requirements are defined in the TIA-526-14-B and IEC 61280-1-4 standards. Encircled Flux compliance reduces loss measurement variation to a goal of +/- 10%, decreasing measurement uncertainty and improving measurement repeatability every time.

Encircled Flux compliant multimode fiber certification
TIA-526-14-B and IEC 61280-1-4 now require tighter launch conditions to reduce measurement uncertainty. With the DTX-EFM2, users who are familiar with the DTX CableAnalyzer can easily make use of these modules to perform EF compliant testing with no additional training. The DTX-EFM2 with the Encircled Flux Test Reference Cords (EF-TRCs) provide the most efficient and practical EF standard compliant testing solution. These EF-TRCs are individually tuned so that any DTX-EFM2 produces an EF compliant launch at the end of the EF-TRC.

Basic fiber certification
DTX Fiber Modules provide a Basic fiber certification solution - loss, length and polarity. Validate fiber link performance per industry standards. Measure optical loss at multiple wavelengths, measure fiber length and verify polarity. You can test two fibers in both directions at both wavelengths with incredible speed without swapping main and remote units, a capability only available from Fluke Networks. Interchangeable connector adapters allow reference and test connections that meet TIA/ISO standards for most SFF (small form factor) fiber connectors.


Product Highlights
  • Efficient Encircled Flux (EF) compliant multimode fiber testing with the DTX CableAnalyzer
  • The most compact and practical EF solution with on-board modules and EF test reference cords
  • Up to 12 second Autotest - loss measurement of two fibers at two wavelengths, optical loss budget calculation, and PASS/FAIL results
  • Easy continuity and polarity verification
  • On-board visual fault locator (VFL) to locate fibers and breaks


General Specifications

ManufacturerFluke Networks
Manufacturer Part #DTX-EFM2
Manufacturer UPC #0754082103820
Cost Central Item #11891327
Product DescriptionFluke DTX Encircled Flux Multimode Fiber Module - Network tester module ( pack of 2 )
Packaged Quantity2 (specifications are for single item)
Device TypeNetwork tester module
Tests, Tools and MeasurementsLength, optical power meter, Visual Fault Locator (VFL)
FiberMulti-mode - 850 nm, 1300 nm
Approximate Dimensions (WxDxH)3 in x 1.1 in x 4.2 in
Approximate Weight4.9 oz
Warranty1 year

Extended Specifications

General
Packaged Quantity2 (specifications are for single item)
Device TypeNetwork tester module
MediaFiber
Tests, Tools and MeasurementsLength, optical power meter, Visual Fault Locator (VFL)
Cables IncludedReference cable kit
ConnectorsSC
Warranty1 year
Dimensions & Weight
Approximate Width3 in
Approximate Depth1.1 in
Approximate Height4.2 in
Approximate Weight4.9 oz
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Min Storage Temperature-4 °F
Max Storage Temperature140 °F

Available Accessories & Related Products

Service and Support - Networking
DescriptionMfg Part #StockPrice 
Fluke Networks Fluke Gold SupportFluke Networks Fluke Gold Support
Extended service agreement - parts and labor - 1 year - for P/N: DTX-EFM2
GLD-DTX-EFM2 No $624.32
Fluke Networks Fluke Gold SupportFluke Networks Fluke Gold Support
Extended service agreement - parts and labor - 3 years - for P/N: DTX-EFM2
GLD3-DTX-EFM2 No $1,687.39

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0667 seconds