HP Cisco B22HP

Mfg Part #: 641146-B21


HP Cisco B22HP
Ordering Information
MSRP$9,799.00
Our Price$8,180.38
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 12:48am 4/1/2014
Qty

The Cisco B22HP Fabric Extender for HP BladeSystem provides an extension of the Cisco Nexus switch fabric to the HP server edge. Logically, it behaves like a remote line card to a parent Cisco Nexus 5000 series switch with the Fabric Extender and the parent Nexus together forming a distributed modular system. The Cisco Fabric Extender for HP BladeSystem forwards traffic to the parent Cisco Nexus 5000 series Switch over eight 10 Gigabit Ethernet uplinks.

Low-cost uplink connections up to 10 meters can be made with copper twin-ax cable, and longer connections up to 100 meters can use the Fabric Extender Transceiver. Standard 10 Gb optics such as SR and LR are also supported.

Downlinks to each server are auto-negotiating and work with all HP Ethernet and CNA modules allowing customers a choice of Ethernet, FCoE or iSCSI connections. Being a seamless extension of a Nexus 5000 allows traffic to be switched according to policies established by the Nexus 5000 series switch with a single point of management.


Product Highlights
  • Each Ethernet downlink supports Fiber Channel over Ethernet (FCoE), Datacenter Bridging (DCB), and iSCSI
  • Each Ethernet downlink can auto-negotiate to 1Gb to support legacy NICs and/or Wake On LAN eight 10 Gb uplinks
  • Each Fabric uplink carries both Ethernet and Fiber Channel over Ethernet (FCoE) traffic
  • Up to 24 Fabric Extenders can be managed by a single Nexus 5000 series switch
  • Ports support Ethernet, iSCSI and DCB protocols
  • Centralized management - all configuration and monitoring performed on parent Nexus switch
  • Up to 24 Fabric Extenders can be managed by a single Nexus 5000 series switch
  • Support for SNMP V1, V2, V3
  • XML (Netconf) support

In The Box
  • Cisco Fabric Extender Module
  • Quick Start Guide

Our company is a HP authorized sales and service center.

General Specifications

ManufacturerHP
Manufacturer Part #641146-B21
Cost Central Item #11458216
Product DescriptionCisco B22HP - Expansion module - GigE, 10 GigE, FCoE - 16 ports + 8 x SFP+ (uplink)
Device TypeExpansion module
Form FactorPlug-in module
Approximate Dimensions (WxDxH)10.6 in x 3.7 in x 1.1 in
Approximate Weight2.8 lbs
Ports Qty16 ports
Auxiliary Ports8 x SFP+ (uplink)
Data Link ProtocolGigE, 10 GigE, FCoE
Data Transfer Rate10 Gbps
CapacityACL entries : 256
Network / Transport ProtocoliSCSI
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.3ap

Extended Specifications

General
Device TypeExpansion module - 16 ports
Form FactorPlug-in module
Networking
Connectivity TechnologyWired
Data Link ProtocolGigE, 10 GigE, FCoE
Auxiliary Ports8 x SFP+ (uplink)
Data Transfer Rate10 Gbps
CapacityACL entries : 256
Network / Transport ProtocoliSCSI
Remote Management ProtocolSNMP 1, SNMP 2, RMON, SNMP 3, CLI
Status IndicatorsPort status
FeaturesFlow control, auto-negotiation, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.3ap
Expansion / Connectivity
Expansion Slots8 (total) / 8 (free) x SFP+
Interfaces16 x 10Gb Ethernet / FCoE - backplane
Compatible Slots1 x expansion slot
Miscellaneous
Compliant StandardsCISPR 22 Class A, VCCI Class A ITE, EN55022 Class A, CB, UL 60950-1, IEC 60950-1, WEEE, FCC Part 15 A, CSA C22.2 No. 60950-1, AS/NZS 3548 Class A, BSMI Class A, KCC Class A
Power
Power Consumption Operational70 Watt
Dimensions & Weight
Approximate Width10.6 in
Approximate Depth3.7 in
Approximate Height1.1 in
Approximate Weight2.8 lbs
Environmental Parameters
Min Operating Temperature50 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 95% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0712 seconds