Home > Networking > Switches > IBM Switches > IBM System Networking RackSwitch G8052

IBM System Networking RackSwitch G8052

Mfg Part #: 730952F


IBM System Networking RackSwitch G8052

Ordering Information
MSRP$10,999.00
Our Price$5,463.85
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The IBM System Networking RackSwitch G8052, a 1/10 Gb Ethernet switch, is ideal for data centers. It delivers unmatched price performance, along with benefits such as server-matched airflow, lower power consumption, low latency, and easy switch management.

The IBM System Networking RackSwitch G8052 is a top-of-rack data center switch that delivers unmatched line-rate layer 2/3 performance at a very attractive price. It has forty-eight 10/100/1000BASE-T RJ45 ports and four 10 Gigabit Ethernet SFP+ ports, and includes hot-swap redundant power supplies and fans as standard, minimizing your configuration requirements. Unlike most rack equipment that cools from side to side, the G8052 has rear-to-front or front-to-rear airflow that matches server airflow.

High performance
The RackSwitch G8052 provides up to 176 Gbps throughput and supports four SFP+ 10 G uplink ports for a very low oversubscription ratio, in addition to a low latency of 1.8 microseconds.

Lower power and better cooling
The RackSwitch G8052 typically consumes just 130 W of power, a fraction of the power consumption of most competitive offerings. Unlike side-cooled switches, which can cause heat recirculation and reliability concerns, the G8052's rear-to-front or front-to-rear cooling design reduces data center air conditioning costs by matching airflow to the server's configuration in the rack. Variable speed fans assist in automatically reducing power consumption.

Layer 3 functionality
The RackSwitch G8052 includes layer 3 functionality, which provides security and performance benefits plus the full range of layer 3 static and dynamic routing protocols, including Open Shortest Path First (OSPF) and Border Gateway Protocol (BGP) for enterprise customers at no additional cost.

Fault tolerance
These switches learn alternate routes automatically and perform faster convergence in the unlikely case of a link, switch, or power failure. The switch uses proven technologies such as layer 2 trunk failover, advanced VLAN-based failover, VRRP, HotLink, Uplink Failure Detection (UFD), IGMP V3 snooping, and OSPF.


Product Highlights
  • Seamless interoperability

In The Box
  • IBM System Networking RackSwitch G8052
  • USB to RS-232 adapter cable
  • Rack mounting kit

Our company is a IBM authorized sales and service center.

General Specifications

ManufacturerIBM
Manufacturer Part #730952F
Manufacturer UPC #0883436110945
Cost Central Item #11315126
Product DescriptionIBM System Networking RackSwitch G8052 - Switch - L3 - managed - 4 x 10 Gigabit SFP+ + 48 x 10/100/1000 - rack-mountable
Device TypeSwitch - 4 ports - L3 - managed
Enclosure TypeRack-mountable
Subtype10 Gigabit Ethernet
Ports4 x 10 Gigabit SFP+ + 48 x 10/100/1000
PerformanceSwitching throughput : 176 Gbps
Routing ProtocolOSPF, BGP, VRRP, OSPFv3, MLDv2
Remote Management ProtocolSNMP 1, RMON, SNMP 3, SNMP 2c
FeaturesFault tolerance, DHCP support, IGMP snooping, IPv6 support, DHCP snooping, Jumbo Frames support, IPSec passthrough, front to back airflow, DHCP relay
Compliant StandardsIEEE 802.3x, IEEE 802.1ab (LLDP)
PowerAC 120/230 V ( 50/60 Hz )
Power RedundancyYes
Approximate Dimensions (WxDxH)17.3 in x 17.5 in x 1.8 in
Approximate Weight12 lbs
Manufacturer Warranty3 years warranty

Extended Specifications

General
Device TypeSwitch - 4 ports - L3 - managed
Enclosure TypeRack-mountable
Subtype10 Gigabit Ethernet
Ports4 x 10 Gigabit SFP+ + 48 x 10/100/1000
PerformanceSwitching throughput : 176 Gbps
Routing ProtocolOSPF, BGP, VRRP, OSPFv3, MLDv2
Remote Management ProtocolSNMP 1, RMON, SNMP 3, SNMP 2c
Encryption AlgorithmIKEv2
FeaturesFault tolerance, DHCP support, IGMP snooping, IPv6 support, DHCP snooping, Jumbo Frames support, IPSec passthrough, front to back airflow, DHCP relay
Compliant StandardsIEEE 802.3x, IEEE 802.1ab (LLDP)
Built-in DevicesLED panel
Expansion / Connectivity
Interfaces4 x 10Gbit LAN - SFP+
Network : 48 x 1000Base-T - RJ-45
1 x USB
1 x console
Power
Power DeviceInternal power supply - hot-plug
Power RedundancyYes
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Consumption Operational130 Watt
Miscellaneous
Included AccessoriesUSB to RS-232 adapter cable
Rack Mounting KitIncluded
Dimensions & Weight
Approximate Width17.3 in
Approximate Depth17.5 in
Approximate Height1.8 in
Approximate Weight12 lbs
Manufacturer Warranty
Service & Support3 years warranty
Service & Support DetailsLimited warranty - 3 years
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating10 - 90% (non-condensing)

Available Accessories & Related Products

Networking - Network Cables
DescriptionMfg Part #StockPrice 
IBM - Network cableIBM - Network cable
Network cable - LC multi-mode - LC multi-mode - 3.3 ft - fiber optic - for Juniper EX4500; BNT RackSwitch G8000, RackSwitch G8052, RackSwitch G8124, RackSwitch G8264
88Y6851 No $44.97
IBM - Network cableIBM - Network cable
Network cable - LC multi-mode - LC multi-mode - 16.4 ft - fiber optic - for Juniper EX4500; BNT RackSwitch G8000, RackSwitch G8052, RackSwitch G8124, RackSwitch G8264
88Y6854 No $86.37
IBM - Network cableIBM - Network cable
Network cable - LC multi-mode - LC multi-mode - 82 ft - fiber optic - for Juniper EX4500; BNT RackSwitch G8000, RackSwitch G8052, RackSwitch G8124, RackSwitch G8264
88Y6857 No $109.04
IBM - Network cableIBM - Network cable
Network cable - SFP+ - SFP+ - 3.3 ft - active cable (signal regeneration) - for BNT RackSwitch G8124; System Networking RackSwitch G8052, G8264
95Y0323 No $117.81
IBM - Network cableIBM - Network cable
Network cable - SFP+ - SFP+ - 10 ft - active cable (signal regeneration) - for BNT RackSwitch G8124; System Networking RackSwitch G8052, G8264
95Y0326 No $142.94
IBM - Network cableIBM - Network cable
Network cable - SFP+ - SFP+ - 16.4 ft - active cable (signal regeneration) - for BNT RackSwitch G8124; System Networking RackSwitch G8052, G8264
95Y0329 No $179.68

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1068 seconds