Home > Printers > Label Printers > ONeil Products Label Printers > ONeil Products O'Neil LP3 Wireless Portable Label Printer

ONeil Products O'Neil LP3 Wireless Portable Label Printer

Mfg Part #: 200271-100

ONeil Products O'Neil LP3 Wireless Portable Label Printer

Ordering Information
Our Price$940.32
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

The retail floor is no place for downtime. Constantly reloading labels or paper, or getting a flashing low battery light in the middle of a markdown is simply unacceptable. The LP3 3" wireless portable label printer from O'Neil delivers greater paper capacity, longer battery life and a range of wireless connectivity options for the retail and manufacturing marketplace. And of course, the reliability O'Neil is known for around the globe.

The LP3 offers almost twice the paper capacity of any printer in its class. It prints from 1" to 3" label stock and can accommodate a wide variety of labels and paper, including the heavy stock necessary for hangtags and other specialty label needs. The LP3's side-load design allows for the fastest and easiest paper loading of any printer on the market. Users simply slide the roll into the printer, pop on the end-cap, and the paper is loaded quickly and trouble-free.

The LP3 uses two standard 7.2V Lithium-Ion (Li-Ion), 2200 mAH rechargeable batteries, providing twice the power capacity available from competitive printers. This eliminates the need for constant recharging between applications and in the middle of shifts. This is important for all applications and especially critical for battery-intensive wireless environments.

When it comes to batteries and battery charging, the LP3 offers yet another significant benefit. Competitive printers use expensive proprietary batteries, incorporating the electronics or "intelligence" necessary for quick-charging into the battery itself. The electronics for quick charging in the LP3 are built-in to the printer, not the battery, thus eliminating the need to purchase a substantially higher-priced battery. Since all rechargeable batteries have a limited life and must be replaced, this becomes a considerable recurring costly and unnecessary expense to the user. The only accessory required for charging the LP3 is a low cost AC adapter.

With uncompromising standards, the LP3 is engineered throughout to endure even the most punishing portable applications. It can take all the bumps and knocks inherent in the mobile workplace by withstanding multiple 4' drops to concrete. Its rock solid print mechanism is proven to provide years of service where other printers fail.

General Specifications

ManufacturerONeil Products
Manufacturer Part #200271-100
Cost Central Item #10544215
Product DescriptionO'Neil LP3 Wireless Portable Label Printer - Label printer - monochrome - direct thermal - Roll (7.6 cm) - 203.2 dpi - up to 120 inch/min - capacity: 1 rolls - Wi-Fi
Printer TypeLabel printer - direct thermal - monochrome
Form FactorPortable
Approximate Weight4 lbs
Max Media Size (Standard)Roll (7.6 cm)
Max Media Size (Custom)3 in
Print SpeedUp to 120 inch/min - B/W
Max Resolution ( B&W )203.2 dpi
RAM Installed ( Max )4 MB SRAM
Flash Memory Installed (Max)16 MB
Media TypeLabels, thermal paper
Total Media Capacity1 rolls
NetworkingPrint server - IEEE 802.11b, IEEE 802.11g
BatteryLithium ion Included Qty 1
Approximate Dimensions (WxDxH)6.2 in x 5.2 in x 7.9 in

Extended Specifications

Printer TypeLabel printer - direct thermal - monochrome
Print SpeedUp to 120 inch/min - B/W
Connectivity TechnologyWireless
Max Resolution ( B&W )203.2 dpi
RAM Installed ( Max )4 MB
Technology / Form FactorSRAM
Flash Memory
Flash Memory16 MB
Media Handling
Media TypeLabels, thermal paper
Max Media Size (Custom)3 in
Media SizesRoll (3 in), Roll (1 in)
Max Printing Width2.83 in
Roll Maximum Outer Diameter3.5 in
Roll Core Diameter1 in
Total Media Capacity1 rolls
Media Feeder(s)1 x manual load - 1 rolls - Roll (3 in)
NetworkingPrint server
Data Link ProtocolIEEE 802.11b, IEEE 802.11g
Compliant StandardsIEEE 802.11b, IEEE 802.11g
Included AccessoriesShoulder strap
Compliant StandardsFCC Class B certified, C-Tick
TypeLithium ion
Capacity2200 mAh
Dimensions & Weight
Approximate Width6.2 in
Approximate Depth5.2 in
Approximate Height7.9 in
Approximate Weight4 lbs

Available Accessories & Related Products

Accessories - Output Accessories
DescriptionMfg Part #StockPrice 
ONeil Products O'NeilONeil Products O'Neil
Shoulder strap - for O'Neil LP3 Wireless Portable Label Printer
220244-000 No $19.87

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
ONeil Products O'NeilONeil Products O'Neil
Power adapter - United States - for O'Neil LP3; Compact OC3; microFlash 2te, 4te; PrintPAD 7900, 9000, CN3, CN3E, MC70/75
220515-100 No $36.90

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1166 seconds