Home > Networking > Repeater / Transceiver > Omnitron Systems Repeater / Transceiver > Omnitron Systems Omnitron FlexPoint 232

Omnitron Systems Omnitron FlexPoint 232

Mfg Part #: 4485-1

Omnitron Systems Omnitron FlexPoint 232

Ordering Information
Our Price$680.58
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

Omnitron's FlexPoint media converters provide conversion between different cabling types as your wiring needs change. The same unit can be used stand-alone, wall-mounted, rack-mounted, or installed in power-redundant Powered Chassis. You can mix and match various FlexPoint converters for any size network to deliver reliability and flexibility!

The FlexPoint 232 fiber converter/extender is a member of the modular FlexPoint product line. The FlexPoint product line provides an extensive range of networking and communication connectivity options across different protocols and media types. The FlexPoint 232 is a serial RS-232 to fiber converter, automatically supporting speeds of up to 115, 200 baud providing the flexibility to facilitate a wide range of needs and applications. This converter extends the distance of the connection to 5 km (3.1 mi.) using multimode fiber and to 58 km (36 mi.) using single-mode fiber. This wide range of distance support provides solutions to the connectivity needs of short haul as well as long haul fiber users. Most distances are available with ST and SC fiber connectors. This feature makes the FlexPoint 232 easy to connect in any applications. The FlexPoint 232 supports both half-duplex and full-duplex modes of operation. Flow control through the FlexPoint 232 can be done via software using the XON / XOFF protocol or via the supported RTS, CTS, DCD, DTR and DCR flow control signals. These features allow the easy interface to any RS-232 DTE or DCE device. Most users who have connected RS-232 devices have experienced the frustration of having to select the appropriate cable for their application. The FlexPoint 232 is designed to be easily set to connect to a DTE or DCE device. This feature includes data lines (TxD and RxD) as well as flow control signals (RTS, CTS, DCD, DTR and DCR) direction configuration. This powerful feature allows the use of straight-through cabling all across the enterprise and makes installation consistent, easy and straight forward. The FlexPoint 232's diagnostic features make it easy to install and configure. The fiber link connection can be verified without actual data activity. The remote loop-back capability allows testing of the fiber link pair by controlling the far-end converter and allowing the installer to test both ends of the fiber from one physical location. The LEDs provide informative status information which makes the installation and status monitoring easy and intuitive. The FlexPoint offers several mounting options. It can be mounted stand-alone utilizing optional wall-mounting hardware. It can also be rack-mounted using a 5-unit rack-mounting shelf or in a 14-unit FlexPoint Powered Chassis.

General Specifications

ManufacturerOmnitron Systems
Manufacturer Part #4485-1
Manufacturer UPC #0800975011465
Cost Central Item #10343466
Product DescriptionOmnitron FlexPoint 232 - Serial port extender - ST single mode / 9 pin D-Sub (DB-9) - up to 3.1 miles - 850 nm
Device TypeSerial port extender - ST single mode / 9 pin D-Sub (DB-9)
Form FactorExternal
Cabling TypeFiber optic, serial RS-232
Data Transfer Rate115.2 Kbps
Optical Wave Length850 nm
Data Link ProtocolRS-232
Max Transfer Distance3.1 miles
PowerAC 110 V
Approximate Dimensions (WxDxH)3 in x 4 in x 1 in
Approximate Weight0.4 lbs
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

Device TypeSerial port extender
Form FactorExternal
Connectivity TechnologyWired
Cabling TypeFiber optic, serial RS-232
Data Link ProtocolRS-232
Data Transfer Rate115.2 Kbps
Optical Wave Length850 nm
Max Transfer Distance3.1 miles
Status IndicatorsLink activity, power, receive
FeaturesFull duplex capability
Expansion / Connectivity
Interfaces1 x RS-232 - ST single mode female x 2
1 x RS-232 - DB-9 female
Rack Mounting KitOptional
MTBF400,000 hours
Power DeviceExternal power adapter
Voltage RequiredAC 110 V ( 60 Hz )
Dimensions & Weight
Approximate Width3 in
Approximate Depth4 in
Approximate Height1 in
Approximate Weight0.4 lbs
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature158 °F
Humidity Range Operating0 - 90%

Available Accessories & Related Products

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
Omnitron Systems OmnitronOmnitron Systems Omnitron
Power converter - 18 - 60 V - 1 output connector(s) - for FlexPoint 10, 10/100, 100, 1000, 232, OC12, OC3FF, T1/E1, TR
4384 No $142.02

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0709 seconds