Home > Networking > Switches > Omnitron Systems Switches > Omnitron Systems Omnitron iConverter 4GT

Omnitron Systems Omnitron iConverter 4GT

Mfg Part #: 8482-4


Omnitron Systems Omnitron iConverter 4GT

Ordering Information
MSRP$375.00
Our Price$261.42
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The iConverter 4GT is a four-port 10/100/1000 Ethernet switch.

The four RJ-45 ports support 10/100/1000Mbps, half/full- duplex, and auto-negotiation. These features are configurable using DIP switches or through software management. The 4GT supports RJ-45 auto-crossover (MDI/MDI-X) on all four ports, eliminating the need for a crossover cable and facilitating connectivity to different types of Ethernet equipment.

The 4GT supports traffic prioritization with strict priority queuing. Incoming frames are assigned to one of four egress queues based on Class of Service (CoS) P-bit value. This allows high priority traffic, such as voice traffic, to egress the network with no impact from lower priority traffic during congestion.

The hot-swappable plug-in module can be mounted in a 19 or 5-module iConverter chassis with any combination of redundant AC and DC power supplies. It can also be mounted in a 2-Module AC or DC powered chassis, or in a 1-Module chassis with AC or DC power input.


Product Highlights
  • 4-port 10/100/1000BASE-T Ethernet switch module
  • Backplane Ethernet ports for connectivity to adjacent modules in the chassis
  • Traffic prioritization supported via Class of Service P-bit value
  • Management of the plug-in module is available with the addition of a management module to the chassis
  • Commercial and wide operating temperature ranges


General Specifications

ManufacturerOmnitron Systems
Manufacturer Part #8482-4
Manufacturer UPC #0800975024915
Cost Central Item #11307473
Product DescriptionOmnitron iConverter 4GT - Switch - managed - 4 x 10/100/1000 - plug-in module
Device TypeSwitch - 4 ports - managed
Enclosure TypePlug-in module
SubtypeGigabit Ethernet
Ports4 x 10/100/1000
Remote Management ProtocolSNMP 1, Telnet, SNMP 3, SNMP 2c
FeaturesHot swap module replacement, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode
Compliant StandardsIEEE 802.3ah
Approximate Dimensions (WxDxH)0.9 in x 4.5 in x 2.8 in
Approximate Weight8 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeSwitch - 4 ports - managed
Enclosure TypePlug-in module
SubtypeGigabit Ethernet
Ports4 x 10/100/1000
Remote Management ProtocolSNMP 1, Telnet, SNMP 3, SNMP 2c
FeaturesHot swap module replacement, auto-negotiation, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode
Compliant StandardsIEEE 802.3ah
Expansion / Connectivity
Interfaces4 x 1000Base-T - RJ-45
Miscellaneous
MTBF450,000 hours
Compliant StandardsNEBS level 3, FCC Class A certified, UL, cUL
Dimensions & Weight
Approximate Width0.9 in
Approximate Depth4.5 in
Approximate Height2.8 in
Approximate Weight8 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 95% (non-condensing)
Min Storage Temperature-40 °F
Max Storage Temperature176 °F

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0604 seconds