Home > Networking > Repeater / Transceiver > Omnitron Systems Repeater / Transceiver > Omnitron Systems Omnitron miConverter GX/T

Omnitron Systems Omnitron miConverter GX/T

Mfg Part #: 1223-5-6


Omnitron Systems Omnitron miConverter GX/T

Ordering Information
MSRP$1,595.00
Our Price$919.07
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The miConverter GX/T is a miniature 10/100/1000BASE-T UTP copper to 1000BASE-X fiber media converter that supports jumbo frames up to 10,240 bytes. The miConverter GX/T provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop computers.

The GX/T features Small Form Pluggable (SFP) transceivers that support 1000BASE-X for interoperability with Gigabit fiber equipment. SFP transceivers enable adaptability to different fiber types, speed and distances, and support Coarse Wave Division Multiplexing (CWDM) technology to increase the bandwidth capacity of fiber infrastructure.

The GX/T also supports SC and ST fixed fiber connectors for multimode, single-mode fiber; and single mode single-fiber models are available.

The Plug-and-Play capability of the miConverter GX/T simplifies fiber-to-the-laptop and fiber-to-the-desktop deployments. Both the fiber port and the UTP port support auto-negotiation, an IEEE standard which defines how all the communicating devices automatically perform their configuration functions. Auto-negotiation achieves the best possible mode of operation (speed, duplex mode and pause mode) between the devices.

The auto-negotiation feature can be disabled on both ports (for manual configuration) using DIP-switches on the module. This is useful in a situation where the GX/T is connected to a non-negotiating device and the configuration parameters must be set manually.

Network flow control is managed by the pause function (configured via auto-negotiation or manually) that prevents network congestion on both the UTP and fiber ports. When pause is enabled and the device is experiencing network congestion, it will send out a Pause signal to its link partner, instructing it to slow down data transmission.

The GX/T generates a remote fault indication when it detects link fault conditions and reports detection of these signals by displaying status on the LED. Through user DIP-switch configuration, the detection of these indicators or link modes can also be propagated to the other port on the GX/T as a means of notifying connected end-devices of the link fault.

Diagnostic data is provided through LED indicators that assist in network installation and maintenance. The LEDs report the availability of power, port activity and link status and speed.

The miConverter GX/T combines Gigabit Ethernet connectivity with the lightweight design and low-power consumption required for both permanent deployment and mobile service networks.


Product Highlights
  • The miConverter GX/T is a 10/100/1000 copper to 1000 fiber media converter
  • Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T, and 1000BASE-X specifications
  • Supports dual fiber and single-fiber 1000BASE-X SFP transceivers for standard or CWDM wavelengths
  • Fiber port supports multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors
  • Both the fiber and UTP ports support auto-negotiation
  • UTP port supports 10/100/1000Mbps and half/full-duplex
  • User-selectable link modes for quick fault detection
  • Auto or manually configured pause function for flow control
  • Models support terminal connector for DC power
  • Small and lightweight


General Specifications

ManufacturerOmnitron Systems
Manufacturer Part #1223-5-6
Manufacturer UPC #0800975019928
Cost Central Item #10343650
Product DescriptionOmnitron miConverter GX/T - Media converter - SC single mode / RJ-45 - up to 87 miles - 1550 nm
Device TypeMedia converter - SC single mode / RJ-45
Form FactorExternal
Cabling Type10Base-T, 100Base-TX, 1000Base-T, 1000Base-X
Data Transfer Rate1 Gbps
Optical Wave Length1550 nm
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Max Transfer Distance87 miles
Approximate Dimensions (WxDxH)1.7 in x 4.1 in x 0.8 in
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorExternal
Networking
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-TX, 1000Base-T, 1000Base-X
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate1 Gbps
Optical Wave Length1550 nm
Max Transfer Distance87 miles
Status IndicatorsLink activity, port transmission speed, power
FeaturesAuto-negotiation, half duplex mode, full duplex mode, wall mountable
Expansion / Connectivity
Interfaces1 x Ethernet 1000Base-X - SC single mode female x 2
1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 female
Miscellaneous
Cables Included1 x USB power cable
Compliant StandardsPlug and Play, FCC Class A certified, UL
Power
Power DeviceExternal power adapter
Dimensions & Weight
Approximate Width1.7 in
Approximate Depth4.1 in
Approximate Height0.8 in
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 95%

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0780 seconds