Perle Systems Perle CM-100-S2LC120

Mfg Part #: 05052380

Perle Systems Perle CM-100-S2LC120

Ordering Information
Our Price$1,713.05
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

Installed in a high density Perle media converter chassis, Perle's feature rich managed Fast Ethernet media converter modules transparently connect UTP copper to fiber. Perle's Fast Ethernet media converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.

Network administrators can rest assured with Perle's advanced features such as auto-negotiation, auto-MDIX, link pass-through, Far End Fault (FEF), and pause which make the end to end link completely transparent.

Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 100Base-TX interface to determine the type of cable connected and automatically configures the connection when enabled. With auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable.

Backup and restore
It provides fast and easy module replacement. Management module will always save a copy of the media converter configuration and will restore this configuration automatically to the media module when it is detected in the slot.

Link pass-through
With link pass-through the state of the 100Base-TX receiver is passed to the 100Base-FX transmitter to make the media converter appear transparent to the end devices that are connected. In addition if Far-End Fault (FEF) is enabled the media converter can turn off the 100Base-TX transmitter when a Far-End Fault (FEF) is received.

Far-End Fault (FEF)
The media converter implements the 802.3 standard for Far-End Fault (FEF) for the indication and detection of remote fault conditions on the 100Base-FX fiber connection. With Far-End Fault (FEF) enabled the media converter transmits the Far-End Fault (FEF) indication over the 100Base-FX fiber connection whenever a receive failure is detected on the 100Base-FX fiber connection. The media converter continuously monitors the100Base-FX fiber connection for a valid signal.

Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The Fast Ethernet media converter supports pause negotiation on the 100Base-TX copper connection.

Product Highlights
  • 100Base-TX to 100Base-FX fiber media converters
  • Extend network distances up to 120 km
  • Advanced features: link pass-through, Far-End Fault (FEF), auto-MDIX
  • High density applications with Perle media converter chassis
  • Manage via SNMP, Telnet/SSH, Internet browser with an MCR-MGT media converter management module

General Specifications

ManufacturerPerle Systems
Manufacturer Part #05052380
Manufacturer UPC #0734660523806
Cost Central Item #11238722
Product DescriptionPerle CM-100-S2LC120 - Media converter - RJ-45 / LC single mode - up to 74.6 miles - 1550 nm
Device TypeMedia converter - RJ-45 / LC single mode
Form FactorPlug-in module
Cabling Type100Base-TX, 100Base-ZX
Data Transfer Rate100 Mbps
Optical Wave Length1550 nm
Data Link ProtocolFast Ethernet
Max Transfer Distance74.6 miles
Approximate Weight5.3 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

Device TypeMedia converter
Form FactorPlug-in module
Connectivity TechnologyWired
Cabling Type100Base-TX, 100Base-ZX
Data Link ProtocolFast Ethernet
Data Transfer Rate100 Mbps
Optical Wave Length1550 nm
Max Transfer Distance74.6 miles
Status IndicatorsLink activity, power, receive
FeaturesFiberAlert, auto-negotiation, auto-uplink (auto MDI/MDI-X), Smart Missing Link (SML), manageable, Far End Fault (FEF), full duplex mode
Compliant StandardsIEEE 802.3u, IEEE 802.3xy
Expansion / Connectivity
Interfaces1 x Ethernet 100Base-TX - RJ-45
1 x Ethernet 100Base-ZX - LC single mode
Compliant StandardsCISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A
Dimensions & Weight
Approximate Weight5.3 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1092 seconds