Perle Systems Perle CM-1110-S2ST10

Mfg Part #: 05052720


Perle Systems Perle CM-1110-S2ST10

Ordering Information
MSRP$617.00
Our Price$470.14
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

The CM-1110 is the managed versions. The product converts a 10/100/1000Base-T cable connection (copper) to a 1000Base-X connection (fiber). The 10/100/1000 Ethernet to fiber converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.

Auto-MDIX
Auto-MDIX (automatic medium-dependent interface crossover) detects the signaling on the 10/100/1000BASE-T interface to determine the type of cable connected and automatically configures the connection.

Error recovery
In certain configurations, and under specific conditions where the media converter module brings down a link to convey status, there is potential for a deadlock. Recovery is achieved by momentarily restoring the link to see if the original failure has been resolved. If it has not, the link will be forced down again, however if the original problem has been resolved, the link will be restored.

Pause (IEEE 802.3xy)
Integrated Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The Perle media converter module can generate and respond to Pause messages.


Product Highlights
  • 10/100/1000Base-T to 1000Base-X
  • Fiber media converters
  • Connect 10/100 devices to Gigabit backbone
  • Advanced features - smart link pass-through
  • Fiber fault alert, auto-MDIX and loopback
  • High density applications with Perle media converter chassis


General Specifications

ManufacturerPerle Systems
Manufacturer Part #05052720
Manufacturer UPC #0734660527200
Cost Central Item #11238737
Product DescriptionPerle CM-1110-S2ST10 - Media converter - RJ-45 / ST single mode - up to 6.2 miles - 1310 nm
Device TypeMedia converter - RJ-45 / ST single mode
Form FactorPlug-in module
Cabling Type10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T
Data Transfer Rate1 Gbps
Optical Wave Length1310 nm
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Max Transfer Distance6.2 miles
Approximate Weight5.3 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorPlug-in module
Networking
Connectivity TechnologyWired
Cabling Type10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate1 Gbps
Optical Wave Length1310 nm
Max Transfer Distance6.2 miles
Status IndicatorsLink activity, power, receive
FeaturesFiberAlert, auto-negotiation, auto-uplink (auto MDI/MDI-X), Smart Missing Link (SML), manageable, Far End Fault (FEF), half duplex mode, full duplex mode, Jumbo Frames support
Compliant StandardsIEEE 802.3u, IEEE 802.3xy
Expansion / Connectivity
Interfaces1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45
1 x Ethernet 1000Base-LX/1000Base-LH - ST single mode
Miscellaneous
Compliant StandardsCISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A
Dimensions & Weight
Approximate Weight5.3 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0695 seconds