Perle Systems Perle C-100-M2SC2

Mfg Part #: 05051210


Perle Systems Perle C-100-M2SC2

Ordering Information
MSRP$232.00
Our Price$177.77
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Installed in a high density Perle media converter chassis, Perle's feature rich fast Ethernet media converter modules family transparently connects UTP copper to fiber. The fast Ethernet media converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.

Auto-MDIX
Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 100Base-TX interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable.

Far-End Fault (FEF)
The media converter implements the 802.3 standard for Far-End Fault for the indication and detection of remote fault conditions on the 100Base-FX fiber connection. With Far-End Fault enabled the media converter transmits the Far-End Fault Indication over the 100Base-FX fiber connection whenever a receive failure is detected on the 100Base-FX fiber connection. The media converter continuously monitors the100Base-FX fiber connection for a valid signal.

Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast Ethernet media converter supports pause negotiation on the 100Base-TX copper connection.


Product Highlights
  • 100Base-TX to 100Base-FX media converters
  • Extend network distances 2 km
  • Advanced features: Far-End Fault, auto-MDIX


General Specifications

ManufacturerPerle Systems
Manufacturer Part #05051210
Manufacturer UPC #0734660512107
Cost Central Item #11482982
Product DescriptionPerle C-100-M2SC2 - Media converter - RJ-45 / SC multi-mode - up to 1.2 miles - 1310 nm
Device TypeMedia converter - RJ-45 / SC multi-mode
Form FactorPlug-in module
Cabling Type100Base-FX, 100Base-TX
Data Transfer Rate100 Mbps
Optical Wave Length1310 nm
Data Link ProtocolFast Ethernet
Max Transfer Distance1.2 miles
Approximate Weight5.3 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorPlug-in module
Networking
Connectivity TechnologyWired
Cabling Type100Base-FX, 100Base-TX
Data Link ProtocolFast Ethernet
Data Transfer Rate100 Mbps
Optical Wave Length1310 nm
Max Transfer Distance1.2 miles
Status IndicatorsLink activity, power, receive
FeaturesAuto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), Far End Fault (FEF), full duplex mode
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3xy
Expansion / Connectivity
Interfaces1 x Ethernet 100Base-TX - RJ-45 female
1 x Ethernet 100Base-FX - SC multi-mode female x 2
Compatible Slots1 x expansion slot
Miscellaneous
MTBF595,000 hours
Compliant StandardsCISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A, REACH
Dimensions & Weight
Approximate Weight5.3 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0708 seconds