Perle Systems Perle C-100-S2LC120

Mfg Part #: 05051380


Perle Systems Perle C-100-S2LC120

Ordering Information
MSRP$2,253.00
Our Price$1,708.45
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Perle's feature rich Fast Ethernet Media Converter Modules family transparently connects UTP copper to fiber. Perle's fast ethernet media converters provide an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.

C-100-S2LC120 - Fast Ethernet Media Converter Module. Dual LC, 100BASE-TX (RJ-45) to 100Base-ZX 1550nm single mode (LC). A Fiber to Ethernet Media Converter designed to be used with the Perle Media Converter Chassis.

Auto-Negotiation (802.3u)
The media converter supports auto negotiation on the fast ethernet 100Base-TX interface.

Auto-MDIX
Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 100Base-TX interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable.

Link Pass-Through
With Link Pass-Through the state of the 100Base-TX receiver is passed to the 100Base-FX transmitter to make the media converter appear transparent to the end devices that are connected. In addition if Far-End Fault is enabled the media converter can turn off the 100Base-TX transmitter when a FAR-End Fault is received.

Far-End Fault (FEF)
The media converter implements the 802.3 standard for Far-End Fault for the indication and detection of remote fault conditions on the 100Base-FX fiber connection. With Far-End Fault enabled the media converter transmits the Far-End Fault Indication over the 100Base-FX fiber connection whenever a receive failure is detected on the 100Base-FX fiber connection. The media converter continuously monitors the100Base-FX fiber connection for a valid signal.

Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast ethernet media converter supports pause negotiation on the 100Base-TX copper connection.



General Specifications

ManufacturerPerle Systems
Manufacturer Part #05051380
Manufacturer UPC #0734660513807
Cost Central Item #11238702
Product DescriptionPerle C-100-S2LC120 - Media converter - RJ-45 / LC single mode - up to 74.6 miles - 1550 nm
Device TypeMedia converter - RJ-45 / LC single mode
Form FactorPlug-in module
LocalizationUnited States
Cabling Type100Base-TX, 100Base-ZX
Data Transfer Rate100 Mbps
Optical Wave Length1550 nm
Data Link ProtocolFast Ethernet
Max Transfer Distance74.6 miles
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorPlug-in module
LocalizationUnited States
Networking
Connectivity TechnologyWired
Cabling Type100Base-TX, 100Base-ZX
Data Link ProtocolFast Ethernet
Data Transfer Rate100 Mbps
Optical Wave Length1550 nm
Max Transfer Distance74.6 miles
Status IndicatorsLink activity, power, receive
FeaturesAuto-negotiation, auto-uplink (auto MDI/MDI-X), Far End Fault (FEF)
Compliant StandardsIEEE 802.3u, IEEE 802.3xy
Expansion / Connectivity
Interfaces1 x Ethernet 100Base-TX - RJ-45 female
1 x Ethernet 100Base-ZX - LC single mode female
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0656 seconds