Home > Networking > Repeater / Transceiver > Perle Systems Repeater / Transceiver > Perle Systems Perle Managed Gigabit Ethernet Extender eX-1SM1110-BNC

Perle Systems Perle Managed Gigabit Ethernet Extender eX-1SM1110-BNC

Mfg Part #: 06004144


Perle Systems Perle Managed Gigabit Ethernet Extender eX-1SM1110-BNC

Ordering Information
MSRP$853.00
Our Price$650.74
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Installed in a high density Perle media converter chassis, 10/100/1000 Ethernet extenders allow you to extend up to 18 Ethernet connections beyond the general IEEE 802.3 limits of 328-foot/100 m using any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications.

The simple and effective point to point Ethernet copper extender is perfect for the wiring closet in commercial buildings, residential units, hospitality environments and remote offices anywhere you need the ability to securely configure, monitor and manage long range Ethernet communication links between separated LANs or LAN devices.

Plug and Play operation
Perle Ethernet extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet Extender. No need to set CO/CPE VDSL pairing.

Link pass-through
With link pass-through the state of the 10/100/1000Base-T Ethernet connection is "passed through" the VDSL link to the 10/100/1000Base-T Ethernet connection on its remote peer. A managed switch on the remote end can then report the state (link up or link down) to its network management system so that any errors can be detected and recovered early.

Interlink fault feedback
Similar to the link pass-through feature, a loss of VDSL Interlink will drop the 10/100/1000 Ethernet ports on each end until the link recovers.

Auto-negotiation
The Ethernet extender supports auto negotiation on the 10/100/1000Base-T interface.

Auto-MDIX
Auto-MDIX detects the signaling on the 10/100/1000 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pinout.

Fixed speed and duplex
Some Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling auto-negotiation on the Ethernet extender, a fixed speed of 10, 100 or 1000 mbps as well as full or half duplex can be configured through DIP switches.

Backup and restore
It provides fast and easy module replacement. Management module will always save a copy of the Ethernet extenders configuration and will restore this configuration automatically to the Ethernet extender module when it is detected in the slot.

Detailed port statistics
To assist in troubleshooting links, an extensive list of ingress and egress counters for both copper and VDSL ports are available. These statistics can be viewed locally via the management module or from a central SNMP NMS on the network.

Pause (IEEE 802.3xy)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The Ethernet extender supports pause negotiation on the 10/100/1000Base-T copper connection.



General Specifications

ManufacturerPerle Systems
Manufacturer Part #06004144
Manufacturer UPC #0679202041441
Cost Central Item #11924386
Product DescriptionPerle Managed Gigabit Ethernet Extender eX-1SM1110-BNC - Network extender - up to 330 ft
Device TypeNetwork extender
Form FactorExternal
LocalizationUnited States
Cabling Type10Base-T, 100Base-TX, 1000Base-T
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, Ethernet over VDSL2
Remote Management ProtocolSNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Max Transfer Distance330 ft
PowerAC 120/230 V
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeNetwork extender
Form FactorExternal
LocalizationUnited States
Networking
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-TX, 1000Base-T
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, Ethernet over VDSL2
Remote Management ProtocolSNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, CLI
Max Transfer Distance330 ft
Status IndicatorsPort transmission speed, power, test mode, alarm, link/activity
FeaturesDHCP support, auto-negotiation, LDAP support, VLAN support, auto-uplink (auto MDI/MDI-X), Syslog support, DiffServ support, manageable, IPv6 support, half duplex mode, full duplex mode, firmware upgradable, Quality of Service (QoS), RADIUS support, IPv4 support, Link Pass-Through, Interlink Fault Feedback, Loopback
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 802.1p, X.509
Expansion / Connectivity
Interfaces1 x Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 female
1 x VDSL2 - BNC
1 x console ( management ) - RJ-45 female
1 x Ethernet ( management ) - RJ-45 female
Miscellaneous
MTBF156,656 hours
Compliant StandardsCISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A, REACH
Power
Power DeviceExternal power adapter
Voltage RequiredAC 120/230 V
Power Consumption Operational6.7 Watt
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0761 seconds