Perle Systems Perle S-1000-S1SC80U

Mfg Part #: 05050854


Perle Systems Perle S-1000-S1SC80U

Ordering Information
MSRP$2,576.00
Our Price$1,953.26
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Perle's line of feature rich gigabit media converter transparently connects copper to fiber. The Gigabit Ethernet to fiber converter provides an economical path to extend the distance of an existing network, the life of non-fiber based equipment, or the distance between two devices.

Network administrators can "see-everything" with Perle's advanced features such as auto-negotiation, auto-MDIX, link pass-through, fiber fault alert, and loopback. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features make Perle's Gigabit Ethernet converters the smart choice for IT professionals.

Auto-negotiation (802.3ab)
The media converter supports auto negotiation. The 1000Base-X fiber interface negotiates according to 802.3 clause 37. The 1000Base-T negotiates according to 802.3 clause 28 and 40. The 1000Base-X will link up with its partner after the highest common denominator (HCD) is reached and the copper has linked up with its partner. The 1000Base-X will continue to cycle through negotiation transmitting a remote fault of offline until the copper is linked up and the HCDs match.

Auto-MDIX with skew correction
Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the 1000Base-T interface to determine the type of cable connected and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair.

Smart link pass-through
When the link mode switch is placed into smart link pass-through mode, the 1000Base-TX port will reflect the state of the 1000Base-X media converter port. This feature can be used whether fiber auto-negotiation is enabled or disabled.

Fiber fault alert
With fiber fault alert the state of the 1000Base-X receiver is passed to the 1000Base-X transmitter. This provides fault notification to the partner device attached to the 1000Base-X interface of the media converter. If the 1000Base-X transmitter is off as a result of this fault it will be turned on periodically to allow the condition to clear should the partner device on the 1000Base-X be using a similar technique. This eliminates the possibility of lockouts that occur with some media converters.

Pause (IEEE 802.3x)
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter supports pause negotiation on the 1000Base-T fiber connection and 1000Base-X fiber connection.


Product Highlights
  • 1000Base-T to 1000Base-X fiber media converter
  • Smart link pass-through, fiber fault alert, auto-MDIX and loopback


General Specifications

ManufacturerPerle Systems
Manufacturer Part #05050854
Manufacturer UPC #0734660508544
Cost Central Item #11319563
Product DescriptionPerle S-1000-S1SC80U - Media converter - RJ-45 / SC single mode - up to 49.7 miles - 1510 (TX) / 1590 (RX) nm
Device TypeMedia converter - RJ-45 / SC single mode
Form FactorExternal
LocalizationUnited States
Cabling Type1000Base-T, 1000Base-BX-U
Data Transfer Rate1 Gbps
Optical Wave Length1510 (TX) / 1590 (RX) nm
Data Link ProtocolGigabit Ethernet
Max Transfer Distance49.7 miles
PowerAC 120/230 V
Approximate Dimensions (WxDxH)3.1 in x 4.7 in x 1 in
Approximate Weight10.6 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorExternal
LocalizationUnited States
Networking
Connectivity TechnologyWired
Cabling Type1000Base-T, 1000Base-BX-U
Data Link ProtocolGigabit Ethernet
Data Transfer Rate1 Gbps
Optical Wave Length1510 (TX) / 1590 (RX) nm
Max Transfer Distance49.7 miles
Status IndicatorsLink activity, power, receive
FeaturesFiberAlert, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode
Compliant StandardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3x
Expansion / Connectivity
Interfaces1 x Ethernet 1000Base-T - RJ-45 female
1 x Ethernet 1000Base-BX-U - SC single mode female
Miscellaneous
Rack Mounting KitOptional
MTBF609,000 hours
Compliant StandardsCISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A, REACH, EN 60825-1
Power
Power DeviceExternal power adapter
Voltage RequiredAC 120/230 V
Power Consumption Operational3 Watt
Dimensions & Weight
Approximate Width3.1 in
Approximate Depth4.7 in
Approximate Height1 in
Approximate Weight10.6 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0763 seconds