Home > Networking > Repeater / Transceiver > Perle Systems Repeater / Transceiver > Perle Systems Perle eXP-1S110L-BNC-XT

Perle Systems Perle eXP-1S110L-BNC-XT

Mfg Part #: 06004290

Perle Systems Perle eXP-1S110L-BNC-XT

Ordering Information
Our Price$670.18
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

Perle eXP-S110-XT PoE Fast Ethernet extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328 ft/100 m while providing Power over Ethernet (PoE) to standards-based compliant devices such as IP cameras and wireless access points located in extreme temperature environments.

This technology enables users to transparently extend up to four 10/100 Power over Ethernet connections across copper wiring. At the central site, the 10/100 Ethernet extender has full PoE support and operates as a Powered Device (PD) under IEEE 802.3af supporting end-span and mid-span power sources (PSE). Alternatively, the unit can be powered by the included 48 V adapter. The PoE Ethernet extender at the central site then transmits power over the copper wire to power the remote PoE Ethernet extender and attached PD.

On-board PoE power controller
As a fully compliant IEEE 802.3af PSE end-span device, this Ethernet extender's PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices.

PSE status indicator
A multi-color LED provided presents the status of the PSE function for easy troubleshooting of power over Ethernet connections.

Power multiplier selection
When used with 4-pair cable such as CAT5 on the VDSL Interlink port, an optional internal strap selection on the Ethernet extender will provide VDSL transmission data on 1 pair and power across the 3 other pairs enabling even greater distances for power transmission to be achieved.

Hi-speed performance
It utilizes second generation VDSL2 technology. When operating under "Profile 30a", Perle Ethernet extenders can provide an aggregate VDSL line rate capability of up to 200 Mbps.

Plug and Play operation
Perle Ethernet extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet extender. No need to set CO/CPE VDSL pairing.

Link pass-through
With link pass-through the state of the 10/100Base-TX Ethernet connection is "passed through" the VDSL link to the 10/100Base-TX Ethernet connection on its remote peer. A managed switch on the remote end can then report the state to its network management system so that any errors can be detected and recovered early.

Auto-MDIX (Automatic Medium-Dependent Interface crossover) detects the signaling on the 10/100 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pinout.

Fixed speed and duplex
Some Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling auto-negotiation on the Ethernet extender, a fixed speed of 10 or 100 mbps as well as full or half duplex can be configured through DIP switches.

Power strain relief strap
A strain relief strap is provided to ensure a solid and secure power connection to the Ethernet extender. It is ideal for areas that may be exposed to vibration.

Product Highlights
  • Transparent to IP video compression protocols

General Specifications

ManufacturerPerle Systems
Manufacturer Part #06004290
Manufacturer UPC #0679202042905
Cost Central Item #11924413
Product DescriptionPerle eXP-1S110L-BNC-XT - Network extender - up to 330 ft
Device TypeNetwork extender
Form FactorExternal
Cabling Type10Base-T, 100Base-TX
Data Link ProtocolEthernet, Fast Ethernet, Ethernet over VDSL2
Max Transfer Distance330 ft
Power Over Ethernet (PoE)PoE
Approximate Dimensions (WxDxH)6.4 in x 4.6 in x 1.5 in
Approximate Weight20.5 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

Device TypeNetwork extender
Form FactorExternal
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-TX
Data Link ProtocolEthernet, Fast Ethernet, Ethernet over VDSL2
Max Transfer Distance330 ft
Status IndicatorsPower, test mode, link/activity
FeaturesAuto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), half duplex mode, full duplex mode, Link Pass-Through, Interlink Fault Feedback, Loopback
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.1Q
Expansion / Connectivity
Interfaces1 x Ethernet 10Base-T/100Base-TX ( PoE ) - RJ-45 female
1 x VDSL2 - BNC female
Compliant StandardsCISPR 24, EN 61000-3-2, EN55022, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 61000-3-3, EN55024, CISPR 22, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, REACH, CSA C22.2 No. 60950-1
Power Over Ethernet (PoE)PoE
Power DeviceExternal power adapter
Power Provided65 Watt
Dimensions & Weight
Approximate Width6.4 in
Approximate Depth4.6 in
Approximate Height1.5 in
Approximate Weight20.5 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature-40 °F
Max Operating Temperature167 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0716 seconds