Home > Networking > Switches > Perle Systems Switches > Perle Systems Perle eXP-1S1110PE-TB-XT

Perle Systems Perle eXP-1S1110PE-TB-XT

Mfg Part #: 06004810

Perle Systems Perle eXP-1S1110PE-TB-XT

Ordering Information
Our Price$874.60
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

This technology enables users to transparently extend up to four 10/100/1000 Power over Ethernet connections across copper wiring. Use single twisted pair, coax or any existing copper wiring previously used in alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV applications.

These PoE+ Ethernet Extenders are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle eXP-S1110PE PoE Ethernet Extenders provide up to 30 W of power to Powered Devices (PDs).

These simple and effective point to point Ethernet Copper Extenders are perfect for commercial buildings, residential units, hospitality environments, and connecting a remote office or private-network backbone to a corporate LAN anywhere you need 10/100/1000 Ethernet communication links for PoE+ devices up to 10,000 feet (3 km) in distance.

Hi-speed performance
Utilizes second generation VDSL2 technology (ITU-T Recommendation G.993). When operating under "Profile 30a", Perle Ethernet Extenders can provide an aggregate VDSL line rate capability of up to 200 Mbps.

Plug and Play operation
Perle Ethernet Extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet Extender. No need to set CO/CPE VDSL pairing. Once a connection is made, both ends will automatically adjust relevant VDSL parameters to optimize the level of bandwidth possible across the copper link.

Interlink fault feedback
Similar to the link pass-through feature, a loss of VDSL link will drop the 10/100/1000 Ethernet port on each end until the link recovers.

The Ethernet Extender supports auto negotiation on the 10/100/1000Base-T interface.

Auto-MDIX (Automatic Medium-Dependent Interface crossover) detects the signaling on the 10/100/1000 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pin-out.

Fixed speed and duplex
Some Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling Auto-Negotiation on the Ethernet Extender, a fixed speed of 10 or 100 Mbps as well as Full or half Duplex can be configured through DIP switches.

Transparent to IP Video compression protocols
Fully transparent to such IP video compression schemes such as MPEG-4, H.264 and MJPEG.

Power strain relief strap
A strain relief strap is provided to ensure a solid and secure power connection to the Ethernet Extender. Ideal for areas that may be exposed to vibration.

When enabled, will perform a loopback on the copper VDSL interlink.

General Specifications

ManufacturerPerle Systems
Manufacturer Part #06004810
Manufacturer UPC #0679202048105
Cost Central Item #11924456
Product DescriptionPerle eXP-1S1110PE-TB-XT - Network extender - up to 330 ft
Device TypeNetwork extender
Form FactorExternal
Cabling Type10Base-T, 100Base-TX, 1000Base-T
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, Ethernet over VDSL2
Max Transfer Distance330 ft
Power Over Ethernet (PoE)PoE+
Approximate Dimensions (WxDxH)6.4 in x 4.6 in x 1.5 in
Approximate Weight20.5 oz
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

Device TypeNetwork extender
Form FactorExternal
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-TX, 1000Base-T
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet, Ethernet over VDSL2
Max Transfer Distance330 ft
Status IndicatorsPower, status, PoE, link/activity
FeaturesFull duplex capability, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), wall mountable, tagged VLAN, Link Pass-Through, Interlink Fault Feedback, Loopback
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3at
Expansion / Connectivity
Interfaces1 x Ethernet 10Base-T/100Base-TX/1000Base-T ( PoE ) - RJ-45 female
1 x VDSL2
Rack Mounting KitOptional
MTBF300,172 hour(s)
Compliant StandardsCISPR 24, EN 61000-3-2, EN55022, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 61000-3-3, EN55024, CISPR 22, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, REACH, CSA C22.2 No. 60950-1
Power Over Ethernet (PoE)PoE+
Power Consumption Operational6.4 Watt
Dimensions & Weight
Approximate Width6.4 in
Approximate Depth4.6 in
Approximate Height1.5 in
Approximate Weight20.5 oz
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature-40 °F
Max Operating Temperature167 °F
Humidity Range Operating5 - 90% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0695 seconds