The Linux-embedded Plustek NVR Slim380 with an integral SATA hard drive and network switch can be setup in minutes and requires no PC to run. Just connect up to 8 IP cameras to the LAN ports (RJ45) then you are ready to record and manage/view via Internet browser. The NVR Slim380 provides video compression in Motion-JPEG and MPEG-4, and H.264. The cameras are fully manageable via your local network or over the Internet. Due to its compact size and light weight design, the device can be installed to any spot even hard-to-reach location. Thanks to aluminum alloy structure, the fanless Plustek Slim380 is able to cope with temperatures from -20-degree to +40-degree and offers trouble free maintenance. The NVR Slim380 uses much less energy than both traditional DVR and PC-based NVR!
The bundled software, Search Tool, is a utility that can detect the IP Camera(s) and Plustek NVR(s) connected to a local network, and make the installation easily. The Plustek NVR Slim380 allows user to control the IP cameras, setup the system, play back recorded videos, and live views during recording via a user-friendly web-based interface.
Surveillance and management functions can also be done through Plustek's in house CMS, MultiManager, that enables you to monitor up to 128 channels locally. The NVR Slim380 power will automatically resume after a power outage, data will be saved and NVR will continue to record. The standard video decoding is AVI format, which can be played via media players. The recording includes time stamps which can be provided for event investigations and can be back up with the included utility. Recorded data can be retrieved securely and remotely viewed/managed via web/FTP with login access control.
The Plustek NVR Slim380 comes with a built-in 2.5" SATA HDD. Different recording modes can be defined for different time periods, for example, alarm recording at daytime and continuous recording at night time. Furthermore, the digital video data can also be transferred to a data center or to other devices for remote back up or event investigation.
Intelligent PTZ control
Convenient control the PTZ on your IP-based camera by "point and click" with your mouse on the control panel, allowing you to view wider angles and finer details.
Motion detection capture
Recording is triggered when a moving object is detected by IP-based camera. All setting can be done over the NVR. There is no need to set the motion detection for each individual camera by itself. With a single screen, all IP-based cameras motion detection can be activated and manage.
Sensor-triggered alarm capture
The NVR can receive any alarm signals from the IP-based cameras specified by the users. The NVR will take the signal and send a notification to the administrator.
Alarm schedule recording capture
Different recording modes can be defined for different time periods, for example, alarm recording at daytime and continuous recording at night time.
Power will automatically resume after a power outage, data will be saved and NVR will continue to record.
Manage and access recordings remotely. Recording data can be retrieved securely and remotely via web/FTP with login access control.
The embedded system provides low power consumption and less vulnerable to virus. The amount of power consumption needed for NVR is less than an energy saving light bulb.
Fan less design
With the fan-less design, users are left with 100% industrial grade product, great for outdoors where extreme temperature fluctuation occurs.
Location mapProduct Highlights
Location map can be uploaded for instant identification of monitoring locations.
- Supports real-time audio (1-way/channel) and video monitoring/ recording
- Immediate live alert with instant alarm signal and email sent to administrator
- Standard video recording format with time/date stamp