Home > Networking > Repeater / Transceiver > Transition Networks Repeater / Transceiver > Transition Networks Transition Ethernet Media Converter

Transition Networks Transition Ethernet Media Converter

Mfg Part #: E-100BTX-FX-05(SM)


Transition Networks Transition Ethernet Media Converter

Ordering Information
MSRP$655.00
Our Price$374.67
ConditionNew and Factory Sealed
Out of Stock as of 8:48am 4/2/2014
Qty

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.

The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.

The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.



General Specifications

ManufacturerTransition Networks
Manufacturer Part #E-100BTX-FX-05(SM)
Cost Central Item #10236015
Product DescriptionTransition Ethernet Media Converter - Transceiver - RJ-45 / SC single mode - up to 12.4 miles - 1300 nm
Device TypeTransceiver - RJ-45 / SC single mode
Form FactorExternal
Cabling Type100Base-FX, 100Base-TX
Data Transfer Rate100 Mbps
Optical Wave Length1300 nm
Data Link ProtocolFast Ethernet
Max Transfer Distance12.4 miles
PowerAC 110/220 V
Approximate Dimensions (WxDxH)3 in x 4.7 in x 1 in
Approximate Weight3.1 lbs
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeTransceiver
Form FactorExternal
ColorBlack
Networking
Connectivity TechnologyWired
Cabling Type100Base-FX, 100Base-TX
Data Link ProtocolFast Ethernet
Data Transfer Rate100 Mbps
Optical Wave Length1300 nm
Max Transfer Distance12.4 miles
Status IndicatorsLink activity, power, link OK
Compliant StandardsIEEE 802.3u
Expansion / Connectivity
Interfaces1 x Ethernet 100Base-FX - SC single mode female - 2
Connections1 x network - Ethernet 100Base-TX - RJ-45 male - 1
Power
Power DeviceExternal power adapter
Voltage RequiredAC 110/220 V ± 10% ( 50/60 Hz )
Power Provided4.5 Watt
Dimensions & Weight
Approximate Width3 in
Approximate Depth4.7 in
Approximate Height1 in
Approximate Weight3.1 lbs
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - parts and labor - lifetime - carry-in
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating10 - 90%

Available Accessories & Related Products

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
Transition Networks - Power adapterTransition Networks - Power adapter 3518 No $19.02

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0616 seconds