Used in pairs, this media converter can extend distances between two twisted pair switches or a switch and a server up to 2 km over multimode fiber, or up to 120 km over single mode fiber. Using one media converter, a switch with a copper port can be connected to a switch with an existing fiber interface. The converters will also automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost.
Allow devices to perform automatic configuration to achieve the best possible mode of operation over a link.
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
Link Pass Through
Link Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
Far End Fault (FEF)
A troubleshooting feature is generally used in conjunction with Link Pass Through to notify both end devices of a loss of link.
Automatic link restoration
Transition Networks's converters will automatically re-establish link in all network conditions.
Pause (IEEE 802.3xy)Product Highlights
Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed.
- Operates under heavy traffic loads without excess heat
- Round trip delay of only 40 bit times