Home > Networking > Repeater / Transceiver > Transition Networks Repeater / Transceiver > Transition Networks Transition Stand-Alone

Transition Networks Transition Stand-Alone

Mfg Part #: E-100BTX-FX-05(SC)


Transition Networks Transition Stand-Alone

Ordering Information
MSRP$345.00
Our Price$170.97
ConditionNew and Factory Sealed
Out of Stock as of 8:48am 4/9/2014
Qty

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.

The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side as the failure.

The converter will automatically re-establish link when connected to two 10/100 auto-negotiating switches if link is lost. With other manufacturers' converters the user must intervene to re-establish link. Pause is a component of Auto-negotiation and because auto-negotiation is not supported over a fiber link, switches cannot utilize this flow control feature without Transition Networks' converters. Enabling the Pause feature on the converters between two switches allows users to take advantage of this flow control feature on their equipment.



General Specifications

ManufacturerTransition Networks
Manufacturer Part #E-100BTX-FX-05(SC)
Manufacturer UPC #0648177006809
Cost Central Item #10236014
Product DescriptionTransition Stand-Alone - Media converter - RJ-45 / SC multi-mode - up to 1.2 miles - 1300 nm
Device TypeMedia converter - RJ-45 / SC multi-mode
Form FactorExternal
LocalizationNorth America
Cabling Type100Base-FX, 100Base-TX
Data Transfer Rate100 Mbps
Optical Wave Length1300 nm
Data Link ProtocolFast Ethernet
Max Transfer Distance1.2 miles
Approximate Dimensions (WxDxH)3 in x 4.7 in x 1 in
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

General
Device TypeMedia converter
Form FactorExternal
LocalizationNorth America
Networking
Connectivity TechnologyWired
Cabling Type100Base-FX, 100Base-TX
Data Link ProtocolFast Ethernet
Data Transfer Rate100 Mbps
Optical Wave Length1300 nm
Max Transfer Distance1.2 miles
Status IndicatorsLink activity, power, link OK
FeaturesAuto-negotiation, AutoCross, Far End Fault (FEF), Link Fault Pass Through function (LFP)
Compliant StandardsIEEE 802.3
Expansion / Connectivity
Interfaces1 x Ethernet 100Base-TX - RJ-45 female
1 x Ethernet 100Base-FX - SC multi-mode female x 2
Miscellaneous
Compliant StandardsFCC Class A certified, EN55024, EN55022 Class A, EN 61000
Power
Power DeviceExternal power adapter
Dimensions & Weight
Approximate Width3 in
Approximate Depth4.7 in
Approximate Height1 in
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature122 °F
Humidity Range Operating5 - 95% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0763 seconds