Home > Networking > Multiplexers / Concentrators > Transition Networks Multiplexers / Concentrators > Transition Networks Transition Stand-Alone 4x T1/E1/J1 Copper to Fiber Transport Mux

Transition Networks Transition Stand-Alone 4x T1/E1/J1 Copper to Fiber Transport Mux

Mfg Part #: S4TEF1040-120-NA

Transition Networks Transition Stand-Alone 4x T1/E1/J1 Copper to Fiber Transport Mux

Ordering Information
Our Price$644.71
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

These products offer a low cost transport capability for four T1/E1/J1 lines and one RS232 data channel line. The offering will provide copper connections compatible with G.703 and AMI/B8ZS/HDB3; while the optical connection will run at 155 Mbps. A hardware-based solution guarantees the constant bit rate of TDM transport without requiring traffic management. The product provides physical layer status monitoring and alarm classification functions for Telecom operators to manage their fiber optic network and reduce operation and maintenance costs.

Automatic link restoration
Transition Networks's converters will automatically re-establish link in all network conditions.

This feature puts a converter in a special mode that enables the device to loop back the signal from the RX port to the TX port on either media for testing and troubleshooting purposes. Loopback can be either local or remote depending on the location of the converter in the link.

Remote management
All chassis-based converters from Transition Networks can be managed through SNMP. While chassis based products are generally placed in the telecommunications room, standalone converters are generally placed in remote locations away from network administrators. Remote in-band management over fiber allows administrators access to the remote device to check status and enable/disable features or the device itself.

Product Highlights
  • Local and remote loopback
  • LEDs for each data port
  • DIP switches for line code, line length, local loopback or remote loopback
  • T1/E1 mode switch
  • Dry relay contacts on each TDM port
  • Local (AUX) management interface (RS232 connector)
  • Access to complete status information on local and remote device
  • Access to local and remote configuration

General Specifications

ManufacturerTransition Networks
Manufacturer Part #S4TEF1040-120-NA
Manufacturer UPC #0648177035656
Cost Central Item #11601556
Product DescriptionTransition Stand-Alone 4x T1/E1/J1 Copper to Fiber Transport Mux - Multiplexor - external - T-1/E-1/J-1
Device TypeMultiplexor
Form FactorExternal
LocalizationNorth America
Line RateT-1/E-1/J-1
FeaturesManageable, firmware upgradable
Approximate Dimensions (WxDxH)3.7 in x 4.7 in x 1.8 in
Manufacturer WarrantyLimited lifetime warranty

Extended Specifications

Device TypeMultiplexor
Form FactorExternal
LocalizationNorth America
Connectivity TechnologyWired
Line RateT-1/E-1/J-1
Line Coding FormatAMI, B8ZS, HDB3
Framing FormatANSI T1.403, G.703
Status IndicatorsLink/activity
FeaturesManageable, firmware upgradable
Compliant StandardsIEEE 802.3
Expansion / Connectivity
Expansion Slots1 (total) / 1 (free) x SFP (mini-GBIC)
Interfaces4 x T1/E1/J1 - RJ-48
1 x
Compatible Slots1 x expansion slot
Compliant StandardsEN55024, EN55022 Class A
Power DeviceExternal power adapter
Power Consumption Operational3.6 Watt
Manufacturer Warranty
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty - lifetime
Dimensions & Weight
Approximate Width3.7 in
Approximate Depth4.7 in
Approximate Height1.8 in
Environmental Parameters
Min Operating Temperature-40 °F
Max Operating Temperature158 °F
Humidity Range Operating5 - 95% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0841 seconds