Home > Accessories > UPS & Power > Tripp Lite UPS & Power > Tripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVAT

Tripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVAT

Mfg Part #: PDUMH30HVAT


Tripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVAT

Tripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVATTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVAT
Ordering Information
MSRP$1,023.00
Our Price$509.29
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

PDUMH30HVAT Metered ATS / Auto-Transfer Switch offers 208/240V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format. Set of two NEMA L6-30P line cords enable separate primary and secondary input connections. Includes 19 built-in outputs (16 C13, 2 C19 & 1 L6-30R). Digital current metering with push-button display control tracks output power consumption in 4 segments: Bank 1 (9 upper C13 & C19 outlets), Bank 2 (9 lower C13 & C19 outlets), L6-30R (single outlet) and total PDU output. Supports 2U installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement.

Tripp Lite's Metered ATS / Auto-Transfer Switch PDU Systems provide redundant-power and hot-swappable UPS options for network and server applications powered by a single input line cord. Separate PRIMARY and SECONDARY input line cords enable a redundant connection to two separate mains circuits. ATS systems will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within 2-6 milliseconds. ATS functionality is supported by any two compatible power sources, regardless of phase angle, to offer support for a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is connected to a separate UPS system. In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary and secondary power availability. Additional LEDs identify the displayed load segment reported by the digital current display.


Product Highlights
  • 208V 30A Automatic Transfer Switch (ATS) / Metered PDU (Power Distribution Unit), Agency de-rated to 24A continuous
  • Provides a redundant power option for critical networking equipment with a single input power cord
  • 2 digit display with segment selection button reports output power consumption in amps for four output segments (Segment 1: 8 C13 & 1 C19 outlets / Segment 2: 8 C13 & 1 C19 outlets / Segment 3: L6-30R outlet / Segment 4: total output of all outlets combined)
  • 19 built-in outlets (16 C13, 2 C19, 1 L6-30R)
  • Set of two 10 ft. / 3m NEMA L6-30P input cables support connection to separate PRIMARY and SECONDARY power sources
  • ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output as sourced from the secondary input cable until power on the primary input is restored and stable
  • ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a 2 UPS environment, the primary input must be connected to an online double conversion UPS similar to Tripp Lite SmartOnline series)
  • Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
  • On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
  • Super-fast switchover between primary and secondary power sources occurs in 3-6 milliseconds
  • Front panel LEDs confirm power availability on both input lines

Please note that this is the European model; please check the power requirements for this product. Please contact us at 1-866-469-2678 if you have any questions.



General Specifications

ManufacturerTripp Lite
Manufacturer Part #PDUMH30HVAT
Manufacturer UPC #0037332159212
Cost Central Item #11421066
Product DescriptionTripp Lite Auto Transfer Switch / Metered PDU PDUMH30HVAT - Power distribution unit ( rack-mountable ) - AC 208/240 V - 18 output connector(s) - 2U - 19"
Device TypePower distribution unit - rack-mountable
Rack Size19" - 2U
Approximate Weight13.9 lbs
Input VoltageAC 208/240 V
Output VoltageAC 208/240 V ( 60 Hz )
Output connector(s)16 x power IEC 320 EN 60320 C13
2 x power IEC 320 EN 60320 C19
Included AccessoriesMounting kit
Approximate Dimensions (WxDxH)17.5 in x 12.5 in x 3.5 in
Manufacturer Warranty2 years warranty

Extended Specifications

General
Device TypePower distribution unit - rack-mountable
Height (Rack Units)2U
Rack Size19"
Power Device
Input VoltageAC 208/240 V
Frequency Required50/60 Hz
Input Connector(s)1 x power NEMA L6-30
Power Output Connectors Details16 x power IEC 320 EN 60320 C13
2 x power IEC 320 EN 60320 C19
Output VoltageAC 208/240 V ( 60 Hz )
Max Electric Current30 A
Miscellaneous
Included AccessoriesMounting kit
Cables IncludedPower cable - 12 ft
Rack Mounting KitIncluded
Compliant StandardsNOM, RoHS, UL 60950-1
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Humidity Range Operating0 - 95% (non-condensing)
Dimensions & Weight
Approximate Width17.5 in
Approximate Depth12.5 in
Approximate Height3.5 in
Approximate Weight13.9 lbs
Dimensions & Weight (Shipping)
Shipping Width20.5 in
Shipping Depth17 in
Shipping Height8 in
Shipping Weight17 lbs

Available Accessories & Related Products

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
Tripp Lite Metered PDU with Automatic Transfer Switching PDUMH15ATTripp Lite Metered PDU with Automatic Transfer Switching PDUMH15AT
Power distribution unit ( rack-mountable ) - AC 120 V - 1800 VA - 8 output connector(s) - 1U
PDUMH15AT No $273.43
Tripp Lite Metered PDU with Automatic Transfer Switching PDUMH20ATTripp Lite Metered PDU with Automatic Transfer Switching PDUMH20AT
Power distribution unit ( rack-mountable ) - AC 120 V - 2400 VA - 16 output connector(s) - 1U
PDUMH20AT No $347.02

Service and Support - Systems
DescriptionMfg Part #StockPrice 
Tripp Lite Extended WarrantyTripp Lite Extended Warranty
Extended service agreement - parts and labor ( for Power Distribution or Automatic Transfer Switch ) - 3 years
WEXT3-PDU-AT No $33.94

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0884 seconds