Home > Accessories > UPS & Power > Tripp Lite UPS & Power > Tripp Lite PowerVerter APSX1250

Tripp Lite PowerVerter APSX1250

Mfg Part #: APSX1250


Tripp Lite PowerVerter APSX1250

Ordering Information
MSRP$782.80
Our Price$453.20
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Tripp Lite's APSX1250 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 1250 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a live wall socket, utility power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings, settings for wet / gel battery types and selectable line to battery power transfer voltages.


Product Highlights
  • Supports 230V AC output from a 230V AC line power source or 12V DC battery source
  • 10 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a 1/2 cycle transfer time
  • Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
  • OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions
  • 3 stage, selectable 7.5/30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
  • Dual C13 output receptacles pass 120V line power or inverter output through to connected equipment
  • 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge
  • Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
  • Set of 4 configuration dipswitches support wet/gel battery charging profiles, charger enable/inhibit, and selectable 144/163/182/201V AC low voltage auto transfer during brownouts
  • Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings
  • Resettable 5A charger AC input breaker and resettable 6A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures
  • Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
  • Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)


General Specifications

ManufacturerTripp Lite
Manufacturer Part #APSX1250
Manufacturer UPC #0037332121660
Cost Central Item #11568949
Product DescriptionTripp Lite PowerVerter APSX1250 - DC to AC power inverter - 12 V - 1.25 kW - 2 output connector(s)
Device TypeDC to AC power inverter - external
Approximate Weight24 lbs
Input Voltage12 V
Output VoltageAC 230 V ± 5% ( 50 Hz )
Power Capacity1.25 kW
Output connector(s)2 x power IEC 320 EN 60320 C13
Approximate Dimensions (WxDxH)8.7 in x 9 in x 7 in

Extended Specifications

General
Device TypeDC to AC power inverter - external
ColorBlack
Power Device
Input Voltage12 V
Input Connector(s)1 x power IEC 320 EN 60320 C14
Power Output Connectors Details2 x power IEC 320 EN 60320 C13
Output VoltageAC 230 V ± 5% ( 50 Hz )
Power Capacity1.25 kW
Output WaveformSinewave
Circuit ProtectionCircuit breaker
Expansion / Connectivity
Interfaces1 x LAN - RJ-45
Miscellaneous
Cables Included1 x power cable - 6 ft
FeaturesLED display
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating0 - 95%
Dimensions & Weight
Approximate Width8.7 in
Approximate Depth9 in
Approximate Height7 in
Approximate Weight24 lbs

Available Accessories & Related Products

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
Tripp Lite - UPS batteryTripp Lite - UPS battery
UPS battery - 1 x 75 Ah
98-121 No $421.62
Tripp Lite APSRM4Tripp Lite APSRM4
Power control unit ( plug-in module )
APSRM4 No $104.22

Computer Systems - Accessories
DescriptionMfg Part #StockPrice 
Tripp Lite - Extended battery caseTripp Lite - Extended battery case BP-260 No $194.17

User Guides & Manuals


Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0902 seconds