Home > Accessories > UPS & Power > Tripp Lite UPS & Power > Tripp Lite SmartOnLine SU10000RT3UG

Tripp Lite SmartOnLine SU10000RT3UG

Mfg Part #: SU10000RT3UG


Tripp Lite SmartOnLine SU10000RT3UG

Tripp Lite SmartOnLine SU10000RT3UGTripp Lite SmartOnLine SU10000RT3UGTripp Lite SmartOnLine SU10000RT3UGTripp Lite SmartOnLine SU10000RT3UGTripp Lite SmartOnLine SU10000RT3UGTripp Lite SmartOnLine SU10000RT3UG
Ordering Information
MSRP$7,623.00
Our Price$4,367.34
FREE SHIPPING
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Global 10,000VA (10kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 6 rack spaces (3U power module and 3U battery pack); maximum installed rack depth of 32.5 in. Worldwide shipping version with 6 C19 outlets. Maximum installed rack depth of 32.5 inches. Expandable battery runtime with optional BP240V10RT3U external battery packs. Full-time sine wave 200, 208, 220, 230, or 240V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without consuming battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; 6 individually breakered C19 output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs provide at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LED/LCD display panel rotates for better viewing in rackmount or tower configurations. Detailed LCD panel with scroll buttons provides detailed diagnostic test information at startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM 2-post rackmount hardware accessories available. Field-replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme.


Product Highlights
  • Tripp Lite SU10000RT3UG 10kVA / 10,000VA / 9000 watt on-line, double-conversion UPS system in 6U total rack/tower configuration (3U UPS power module and 3U external battery pack)
  • Detachable PDU with manual bypass switch enables hot-swappable UPS power module replacement with no interruption in output power to connected networking equipment
  • Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions
  • Hardwire input; 6 C19 outlets
  • Maximum installed rack depth of only 32.5 in. / 82.6cm
  • Full-time active power conditioning provides clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise
  • Double-conversion operation converts raw input from AC to DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types
  • Maintains full-time sine wave output within 2% of selectable 200/208/220/230/240V nominal during brownouts as low 100V and overvoltages as high as 300V
  • Supports 50/60Hz operation for worldwide frequency compatibility
  • Expandable runtime is supported with optional BP240V10RT3U; BP240V557C-1PH; BP240V787C-1PH; BP240V1037C-1PH; BP240V1407C-1PH external battery packs
  • Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
  • Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs
  • Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement
  • PowerAlert monitoring software offers detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted
  • Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA (Network Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other networking devices
  • Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232 and USB interfaces
  • HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces
  • Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification
  • Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module)
  • Supports Emergency Power Off (EPO) via built-in interface
  • Included rail kit supports 6U 19 inch rackmount installation in 4 post racks
  • Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks
  • Front panel LEDs and LCD readout with scroll controls and password option supports visual monitoring of all major UPS functions and advanced UPS settings for charge level, nominal voltage selection, frequency conversion and other operational parameters
  • LED / LCD display panel rotates for viewing in rackmount or tower configurations
  • Industrial mode option (factory preset) enables supports high current startup loads by momentarily switching to bypass mode in response to short duration overload conditions
  • Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)
  • External battery packs are field replaceable and hot swappable

Please note that this is the European model; please check the power requirements for this product. Please contact us at 1-866-469-2678 if you have any questions.



General Specifications

ManufacturerTripp Lite
Manufacturer Part #SU10000RT3UG
Manufacturer UPC #0037332146373
Cost Central Item #10210906
Product DescriptionTripp Lite SmartOnLine SU10000RT3UG - UPS - AC 200/208/220/230/240 V - 9 kW - 10000 VA - RS-232 - 6 output connector(s) - 6U
Device TypeUPS - external
Rack Size6U
Approximate Weight55.1 lbs
Input VoltageAC 200/208/220/230/240 V
Output VoltageAC 200/208/220/230/240 V ± 2% ( 50/60 Hz )
Power Capacity9 kW / 10000 VA
Output connector(s)6 x power IEC 320 EN 60320 C19
Battery Form FactorInternal
Run Time (Up To)4 min
NetworkingRS-232
Approximate Dimensions (WxDxH)17.5 in x 25 in x 5.2 in
Manufacturer Warranty2 years warranty

Extended Specifications

General
Device TypeUPS - external
Battery Enclosure TypeInternal
Height (Rack Units)6U
ColorAttractive black
Power Device
UPS TechnologyOn-line
Input VoltageAC 200/208/220/230/240 V
Input Voltage RangeAC 156 - 276 V
Frequency Required50/60 Hz
Input Connector(s)Hardwire
Power Output Connectors Details6 x power IEC 320 EN 60320 C19
Output VoltageAC 200/208/220/230/240 V ± 2% ( 50/60 Hz )
Power Capacity9 kW / 10000 VA
Output WaveformSinewave
Surge SuppressionYes
Battery
Voltage ProvidedAC 240 V
Run Time (Up To)4 min
Networking
Remote Management InterfaceRS-232
Expansion / Connectivity
Interfaces1 x management (RS-232) - 9 pin D-Sub (DB-9)
1 x management - 9 pin D-Sub (DB-9)
1 x EPO (emergency power off)
Expansion Slot(s)1 (total) / 1 (free) x expansion slot
Miscellaneous
Equipment Protection Value250000 US Dollars
FeaturesAudible alarm, LCD display, LED indicators
Compliant StandardsFCC Class A certified, CSA, NOM, UL 1778, RoHS
Software / System Requirements
Software IncludedTrippLite PowerAlert
Manufacturer Warranty
Service & Support2 years warranty
Service & Support DetailsLimited warranty - 2 years
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating0 - 95%
Dimensions & Weight
Approximate Width17.5 in
Approximate Depth25 in
Approximate Height5.2 in
Approximate Weight55.1 lbs
Dimensions & Weight (Shipping)
Shipping Width33.5 in
Shipping Depth23 in
Shipping Height42.1 in
Shipping Weight337.3 lbs

Available Accessories & Related Products

Accessories - UPS & Power
DescriptionMfg Part #StockPrice 
Tripp Lite - UPS batteryTripp Lite - UPS battery
UPS battery - 3U
BP240V10RT3U No $949.92
Tripp Lite Monitored PDU PDUMNV20HVTripp Lite Monitored PDU PDUMNV20HV
Power distribution unit ( rack-mountable ) - AC 208/230/240 V - Ethernet 10/100 - 24 output connector(s) - 0U
PDUMNV20HV No $325.14
Tripp Lite Metered PDU PDUMV20HVTripp Lite Metered PDU PDUMV20HV
Power distribution unit ( rack-mountable ) - AC 208/230/240 V - 38 output connector(s) - 0U
PDUMV20HV No $165.35
Tripp Lite Switched, Metered PDU with Remote Monitoring PDUMV20HVNETTripp Lite Switched, Metered PDU with Remote Monitoring PDUMV20HVNET
Power distribution unit ( rack-mountable ) - AC 208/230/240 V - Ethernet 10/100 - 24 output connector(s) - 0U
PDUMV20HVNET No $584.12

Computer Systems - Accessories
DescriptionMfg Part #StockPrice 
Tripp Lite 2POSTRMKITHDTripp Lite 2POSTRMKITHD
UPS rack mounting kit - 3U
2POSTRMKITHD No $90.00
Tripp Lite - Environmental moduleTripp Lite - Environmental module ENVIROSENSE No $115.50

Networking - Network Adapters
DescriptionMfg Part #StockPrice 
Tripp Lite MODBUSCARDTripp Lite MODBUSCARD
Remote management adapter - RS-232/422/485
MODBUSCARD No $232.19
Tripp Lite RELAYIOCARDTripp Lite RELAYIOCARD
Remote management adapter
RELAYIOCARD No $174.14
Tripp Lite - Remote management adapterTripp Lite - Remote management adapter
Remote management adapter - 10Mb LAN - 10Base-T
SNMPWEBCARD No $203.17

Service and Support - Systems
DescriptionMfg Part #StockPrice 
Tripp Lite - Extended service agreementTripp Lite - Extended service agreement
Extended service agreement - parts and labor - 1 year ( 3rd year )
WEXT3-SU10K No $497.86
Tripp Lite - Extended service agreementTripp Lite - Extended service agreement
Extended service agreement - parts and labor - 3 year ( 3rd/4th/5th year )
WEXT5-SU10K No $1,484.75

User Guides & Manuals


Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.1538 seconds