Xerox WNA-100 - Bridge
Mfg Part #: 097S03740
 |
The Xerox Wireless Network Adapter allows multiple users on a wireless local area network (LAN) to print and scan to Xerox devices. The Wireless Network Adapter can be used in 802.11a/b/g wireless networks for accessing Xerox devices. The adapter also includes an ethernet interface for connecting to a Xerox device. After configuring the adapter for your wireless LAN, and connecting the Xerox printing device up to your wired network, you can print to that device over the wireless network. If the device has network scan or fax capability, you can use these services.
The Wireless Network Adapter is a LAN bridge that transparently transmits network traffic from the wireless LAN to the wired network. It can be used with a large number of Xerox printers and multifunction devices and can also be configured to work in a large number of wireless environments. The Wireless Network Adapter supports common wireless security protocols (WEP, WPA, WPA2) and 802.1X and has port based network access control. The adapter has a built-in web server for configuring the device using your favorite browser.
|
Our company is a Xerox authorized sales and service center.
Extended Specifications
General
| Device Type | Bridge |
| Form Factor | External |
| Approximate Width | 1.5 in |
| Approximate Depth | 4 in |
| Approximate Height | 5.5 in |
| Approximate Weight | 8.1 oz |
| Localization | North America |
Processor
| Type | 1 x 166 MHz |
| Max Supported Qty | 1 |
Memory
| RAM | 4 MB SDRAM |
| Flash Memory | 2 MB |
Networking
| Connectivity Technology | Wireless |
| Data Transfer Rate | 54 Mbps |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g |
| Network / Transport Protocol | TCP/IP, FTP, BOOTP, DHCP, DNS |
| Remote Management Protocol | SNMP, Telnet, HTTPS |
| Communication Mode | Half-duplex, full-duplex |
| Max Range Indoors | 180 ft |
| Status Indicators | Link activity, power, error |
| Features | Half duplex mode, full duplex mode, firmware upgradable |
| Compliant Standards | IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x |
Antenna
| Antenna | External detachable |
| Antenna Qty | 1 |
| Directivity | Omni-directional |
Expansion / Connectivity
| Interfaces | 1 x network - Ethernet 10Base-T/100Base-TX - RJ-45 |
Miscellaneous
| Cables (Details) | 1 x crossover cable |
| Mounting Kit | Included |
| Encryption Algorithm | SSL, WPA, WPA2 |
| Authentication Method | X.509 certificates, Extensible Authentication Protocol (EAP) |
| Compliant Standards | FCC Class B certified, CE, VCCI Class B ITE, EN55024, EN55022 Class B, EN 301.489.1, EN 301.489.17, FCC Part 15 B, IC, FCC Part 15 C, EN 300.328-2, FCC Part 2, FCC Part 15 E, FCC CFR47, EN 301.893 |
Power
| Power Device | Power adapter - external |
| Voltage Required | AC 120 V |
Software / System Requirements
| Software Included | Xerox CentreWare IS Embedded Web Server |
Environmental Parameters
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 122 °F |
| Humidity Range Operating | 10 - 90% |
Compatible With
|
(5.00)
details...
