Home > Networking > Network Devices > Zhone Technologies Network Devices > Zhone Technologies Zhone EtherXtend 2200 Series ETHX-2214-DS3

Zhone Technologies Zhone EtherXtend 2200 Series ETHX-2214-DS3

Mfg Part #: ETHX-2214-DS3-DC

Zhone Technologies Zhone EtherXtend 2200 Series ETHX-2214-DS3

Ordering Information
Our Price$967.50
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014

The EtherXtend 2200 Series of DS3 Ethernet Access Devices (EADs) allows Carriers, ISPs and PTTs to deliver Ethernet services to virtually anywhere, using standard unframed/unstructured DS3 circuits. These units permit the efficient and reliable delivery of Ethernet on a single DS3 or on a bonded pair of DS3 circuits. With the ability to provide up to 90 Mbps of data transport, near native 10/100BT Ethernet speeds can be achieved to deliver demanding LAN, WAN, and IP-based services to an increasingly sophisticated generation of small and medium-sized business customers.

The EtherXtend 2200 Series of DS3 EADs can be deployed at any location that is served by one or more unframed/unstructured DS3s; and because they use Ethernet instead of ATM or Frame Relay, they are optimized for the delivery of high speed Internet Protocol (IP) traffic, including applications requiring high bandwidth, low latency transport mechanisms such as video conferencing, digital video surveillance, IP telephony and much more.

The EtherXtend 2200 Series of DS3 EADs feature an integrated 4-port 10/100 Ethernet switch and either one or two DS3 ports, each capable of delivering up to 45 Mbps of bandwidth. On a 2-port device, the two DS3 ports can be bonded together to provide 90 Mbps data rates. The loop bonding technology used by the EtherXtend 2200 Series DS3 EADs is the industry-leading, Net-to-Net (N2N) loop bonding protocol.

To maximize the total bandwidth available, the ETHX-2214-DS3 devices operate in a DS3 framer-bypass mode whereby the Ethernet traffic is mapped onto the entire 44.736 Mbps of each DS3 facility (including the overhead bits normally used for various DS3 framing formats). Therefore, unframed DS3 circuits (rather than M13 or C-bit Parity DS3 frame formats) are to be used with ETHX-2214-DS3 network extenders, and any intermediary DS3 transport or multiplexing equipment must be set to regenerate the entire 44.736 Mbps of bandwidth without modifying or omitting any of the bits typically associated with overhead in framed DS3 facilities. By combining unframed DS3s with N2N loop bonding protocols, the ETHX-2214 devices offer automatic, efficient, resilient, and configuration-free deployment with greater total throughput capacity than a traditional DS3 circuit.

The EtherXtend DS3 EADs also supports many advanced network features, including: 802.1Q VLANs, built-in security features, advanced QoS and sophisticated bandwidth management and control features available only with Zhone's unique Multimedia Traffic Management (MTM) capabilities.

Product Highlights
  • Deliver Ethernet at speeds up to 90 Mbps to anywhere that can be served by unframed/unstructured DS3 circuits
  • Automatic load balancing and fail-over on bonded ports for optimum throughput and redundancy
  • Connects directly to any RJ45 10/100 Mbps Ethernet port via an integrated 4-port switch
  • Provide sophisticated QoS and application-aware traffic control
  • Full support for Zhone's unique, Multimedia Traffic Management (MTM) capabilities
  • Environmentally hardened and NEBS Level 1 certified
  • Flexible management: web-based, CLI, and SNMP

General Specifications

ManufacturerZhone Technologies
Manufacturer Part #ETHX-2214-DS3-DC
Manufacturer UPC #0753353022655
Cost Central Item #10341522
Product DescriptionZhone EtherXtend 2200 Series ETHX-2214-DS3 - Network extender
Device TypeNetwork extender
Form FactorExternal
Cabling Type10Base-T, 100Base-TX
Data Transfer Rate45 Mbps
Data Link ProtocolEthernet, Fast Ethernet, Ethernet over Copper
Remote Management ProtocolSNMP, HTTP, CLI
PowerDC -36 -72 V
Approximate Dimensions (WxDxH)8.5 in x 6.7 in x 1.9 in
Approximate Weight15.9 oz
Manufacturer Warranty1 year warranty

Extended Specifications

Device TypeNetwork extender
Form FactorExternal
Connectivity TechnologyWired
Cabling Type10Base-T, 100Base-TX
Data Link ProtocolEthernet, Fast Ethernet, Ethernet over Copper
Data Transfer Rate45 Mbps
Remote Management ProtocolSNMP, HTTP, CLI
Status IndicatorsCollision status, port transmission speed, port duplex mode, power, alarm, transmit, receive, link/activity
FeaturesVLAN support, DiffServ support, Quality of Service (QoS)
Compliant StandardsIEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p
Expansion / Connectivity
Interfaces1 x DS3 - BNC x 2
4 x Ethernet 10Base-T/100Base-TX - RJ-45
1 x serial - RJ-45
Rack Mounting KitOptional
Compliant StandardsICES-003, FCC Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, NEBS, CSA 22.2, GR-1089-CORE, GR-63-CORE
Voltage RequiredDC -36 -72 V
Power Consumption Operational10 Watt
Dimensions & Weight
Approximate Width8.5 in
Approximate Depth6.7 in
Approximate Height1.9 in
Approximate Weight15.9 oz
Manufacturer Warranty
Service & Support1 year warranty
Service & Support DetailsLimited warranty - 1 year
Environmental Parameters
Min Operating Temperature-40 °F
Max Operating Temperature158 °F
Humidity Range Operating5 - 95% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0706 seconds