Home > Networking > Bridges > Zhone Technologies Bridges > Zhone Technologies Zhone EtherXtend ETHX-3210

Zhone Technologies Zhone EtherXtend ETHX-3210

Mfg Part #: ETHX-3210-NA


Zhone Technologies Zhone EtherXtend ETHX-3210

Ordering Information
MSRP$899.00
Our Price$417.00
ConditionNew and Factory Sealed
Out of Stock as of 2:47am 3/29/2014
Qty

Zhone's EtherXtend SHDSL EFM Ethernet Access Device (EAD) allows carriers, CLECs, ISPs and PTTs to deliver Ethernet services to their customers simply, quickly and cost-effectively over the existing copper plant. Intended for deployment at end-users' locations, this device allows delivery of IEEE 802.3ah Ethernet in the First Mile (EFM) services using the SHDSL standards. By supporting up to 13.6 Mbps over a single copper pair, each pair can carry significantly more bandwidth than competing products that rely on traditional G. SHDSL standards.

The unit supports EFM loop bonding, thereby enabling up to 54 Mbps over four copper pairs. Because this is an EFM product, the loops can be at different rates, and still be part of the EFM bundle. This access device is equipped with an autorate capability that allows the unit to run at the maximum line rate supported by the copper loop. This autorate feature greatly simplifies installation and service provisioning.

Typically, the MXK at the central office is used with the EtherXtend EFM endpoints. However, the EtherXtend endpoints (without voice) can also work back to back without the MXK.

Voice features
The EFM access device supports SIP or MGCP. All the major voice features are supported. This includes features such as three-way-calling, caller ID, distinctive ringing, T.38 fax, and V.90 modem.

Gateway features
The EFM access device is a full-featured gateway with integrated DHCP server, ALGs, NAT router, PPPoE client, scheduling, comprehensive logging, and more. The EFM product line implements a very flexible QoS allowing the service provider to guarantee that services are being prioritized correctly and the end-user is getting the quality of experience that is expected.

Management
The EFM access device has intuitive web and command line interfaces. The zNID is also managed by the Zhone Network Management System (ZMS), using SNMP. software upgrades and configuration backups can be handled automatically by the ZMS using the CPE manager feature.


Product Highlights
  • Full VLAN support with priority and QoS
  • Automatic load balancing on bonded EFM ports for optimum throughput
  • Units operate in back to back mode (CO and CPE mode)
  • Environmentally hardened for use in extreme conditions or remote cabinets
  • Remote management - web GUI, SNMP and ZMS CPE manager

In The Box
  • Zhone EtherXtend ETHX-3210
  • Power adapter


General Specifications

ManufacturerZhone Technologies
Manufacturer Part #ETHX-3210-NA
Manufacturer UPC #0753353030285
Cost Central Item #11457617
Product DescriptionZhone EtherXtend ETHX-3210 - Bridge/router - DSL
Device TypeBridge/router - DSL modem
Enclosure TypeDesktop
Digital Signaling ProtocolSHDSL
Data Link ProtocolEthernet, Fast Ethernet
Network / Transport ProtocolPPPoE
Remote Management ProtocolSNMP, Telnet, HTTP, CLI
FeaturesFirewall protection, NAT support, VLAN support, IGMP snooping, traffic shaping, ALG support, DiffServ support, firmware upgradable, Quality of Service (QoS), DHCP server, DHCP client
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 801.1p, IEEE 802.3ah
PowerAC 120/230 V ( 50/60 Hz )
Approximate Dimensions (WxDxH)8.7 in x 6.3 in x 2 in
Approximate Weight15.9 oz
LocalizationNorth America

Extended Specifications

General
Device TypeBridge/router
Enclosure TypeDesktop
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet
Network / Transport ProtocolPPPoE
Remote Management ProtocolSNMP, Telnet, HTTP, CLI
FeaturesFirewall protection, NAT support, VLAN support, IGMP snooping, traffic shaping, ALG support, DiffServ support, firmware upgradable, Quality of Service (QoS), DHCP server, DHCP client
Compliant StandardsIEEE 802.3, IEEE 802.1Q, IEEE 801.1p, IEEE 802.3ah , VCCI Class A ITE, EN55024, EN55022 Class A, ICES-003 Class A, UL 60950-1, EN 60950-1, FCC Part 15 A, CSA C22.2 No. 60950-1
Communications
TypeDSL modem
Digital Signaling ProtocolSHDSL
Protocols & SpecificationsITU G.991.2 (G.shdsl)
Max Transfer Rate11.4 Mbps
Expansion / Connectivity
InterfacesWAN : 1 x SHDSL - RJ-11
Management : 1 x 4 pin USB Type B
LAN : 4 x 10Base-T/100Base-TX - RJ-45
Power
Power DeviceExternal power adapter
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Consumption Operational12 Watt
Miscellaneous
MTBF100,000 hours
LocalizationNorth America
Dimensions & Weight
Approximate Width8.7 in
Approximate Depth6.3 in
Approximate Height2 in
Approximate Weight15.9 oz
Environmental Parameters
Min Operating Temperature32 °F
Max Operating Temperature104 °F
Humidity Range Operating5 - 95% (non-condensing)

Customer Care
Help Desk
Web Site Features
Company Information

Total time: 0.0745 seconds